[openwrt/openwrt] ath79: add support for jjPlus JWAP230
LEDE Commits
lede-commits at lists.infradead.org
Fri Dec 10 15:51:43 PST 2021
chunkeey pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/7853453950bf47b518673dc50b61903cd48c9081
commit 7853453950bf47b518673dc50b61903cd48c9081
Author: Olivier Valentin <valentio at free.fr>
AuthorDate: Thu Dec 2 17:05:18 2021 +0100
ath79: add support for jjPlus JWAP230
The jjPlus JWAP230 is an access point board built around the QCA9558,
with built-in 2.4GHz 3x3 N WiFi (28dBm). It can be expanded with 2
mini-PCIe boards, and has an USB2 root port.
Specifications:
- SOC: Qualcomm Atheros QCA9558
- CPU: 720MHz
- H/W switch: QCA8327 rev 2
- Flash: 16 MiB SPI NOR (en25qh128)
- RAM: 128 MiB DDR2
- WLAN: AR9550 built-in SoC bgn 3T3R (ath9k)
- PCI: 2x mini-PCIe (optional 5V)
- LEDs: 6x LEDs (3 are currently available)
- Button: 1x Reset (not yet defined)
- USB2:
- 1x Type A root port
- 1x combined mini-PCIe
- Ethernet:
- 2x 10/100/1000 (1x PoE 802.3af (36-57 V))
Notes:
The device used to be supported in the ar71xx target.
For upgrades: Please use "sysupgrade --force -n <image>".
This will restore the device back to OpenWrt defaults!
MAC address assignment:
use source
LAN art 0x0
WAN art 0x6
WLAN art 0x1002 (as part of the calibration data)
Flash instructions:
- install from u-boot with tftp (requires serial access)
> setenv ipaddr a.b.c.d
> setenv serverip e.f.g.h
> tftp 0x80060000 \
openwrt-ath79-generic-jjplus_jwap230-squashfs-sysupgrade.bin
> erase 0x9f050000 +${filesize}
> cp.b $fileaddr 0x9f050000 $filesize
> setenv bootcmd bootm 0x9f050000
> saveenv
Signed-off-by: Olivier Valentin <valentio at free.fr>
[Added DT-Leds (based on ar71xx), Added more notes about sysupgrade,
fixed "qca9550" to match SoC in commit and dts file name]
Signed-off-by: Christian Lamparter <chunkeey at gmail.com>
---
target/linux/ath79/dts/qca9558_jjplus_jwap230.dts | 183 +++++++++++++++++++++
.../generic/base-files/etc/board.d/02_network | 4 +
target/linux/ath79/image/generic.mk | 8 +
3 files changed, 195 insertions(+)
diff --git a/target/linux/ath79/dts/qca9558_jjplus_jwap230.dts b/target/linux/ath79/dts/qca9558_jjplus_jwap230.dts
new file mode 100644
index 0000000000..159013066f
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_jjplus_jwap230.dts
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "jjPlus JWAP230";
+ compatible = "jjplus,jwap230", "qca,qca9558";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: led-0 {
+ label = "green:power";
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_POWER;
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ };
+
+ led-1 {
+ color = <LED_COLOR_ID_GREEN>;
+ function-enumerator = <0>;
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ };
+
+ led-2 {
+ color = <LED_COLOR_ID_GREEN>;
+ function-enumerator = <1>;
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash at 0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition at 40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ partition at 50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x050000 0xfa0000>;
+ };
+
+ art: partition at ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_art_lan: macaddr at 0 {
+ reg = <0x0 0x6>;
+ };
+
+ macaddr_art_wan: macaddr at 6 {
+ reg = <0x6 0x6>;
+ };
+
+ calibration_art_wlan: calibration at 1000 {
+ reg = <0x1000 0x440>;
+ };
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ switch {
+ compatible = "qca,ar8327";
+ reg = <0>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
+ 0x58 0xffb7ffb7 /* LED_CTRL2 */
+ 0x5c 0x03ffff00 /* LED_CTRL3 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ 0x0c 0x00080080 /* PORT6 PAD MODE CTRL */
+ 0x94 0x0000007e /* PORT6_STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ nvmem-cells = <&macaddr_art_wan>;
+ nvmem-cell-names = "mac-address";
+
+ pll-data = <0xae000000 0x80000101 0x80001313>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+
+ gmac_config: gmac-config {
+ device = <&gmac>;
+
+ rxdv-delay = <3>;
+ rxd-delay = <3>;
+ txen-delay = <0>;
+ txd-delay = <0>;
+ rgmii-enabled = <1>;
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ nvmem-cells = <&macaddr_art_lan>;
+ nvmem-cell-names = "mac-address";
+
+ pll-data = <0x03000101 0x00000101 0x00001313>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&wmac {
+ status = "okay";
+ nvmem-cells = <&calibration_art_wlan>;
+ nvmem-cell-names = "calibration";
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb_phy1 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index 11e8d59058..45b002330e 100644
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -306,6 +306,10 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0 at eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
;;
+ jjplus,jwap230)
+ ucidef_add_switch "switch0" \
+ "0 at eth0" "5:wan:1" "1:lan:2" "6 at eth1"
+ ;;
joyit,jt-or750i)
ucidef_set_interface_wan "eth1"
ucidef_add_switch "switch0" \
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index c259db94af..cff4b98eae 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -1407,6 +1407,14 @@ define Device/jjplus_ja76pf2
endef
TARGET_DEVICES += jjplus_ja76pf2
+define Device/jjplus_jwap230
+ SOC := qca9558
+ DEVICE_VENDOR := jjPlus
+ DEVICE_MODEL := JWAP230
+ IMAGE_SIZE := 16000k
+endef
+TARGET_DEVICES += jjplus_jwap230
+
define Device/joyit_jt-or750i
SOC := qca9531
DEVICE_VENDOR := Joy-IT
More information about the lede-commits
mailing list