[openwrt/openwrt] lantiq: dts: Move the &usb_vbus nodes out of &gpio

[LEDE Commits]

adrian pushed a commit to openwrt/openwrt.git, branch openwrt-19.07:
https://git.openwrt.org/de75d6ecfaa50261cfffba0e0f61a5cc3cc0d001

commit de75d6ecfaa50261cfffba0e0f61a5cc3cc0d001
Author: Luca Olivetti <luca at ventoso.org>
AuthorDate: Mon Jul 6 20:24:02 2020 +0200

    lantiq: dts: Move the &usb_vbus nodes out of &gpio
    
    Move the USB VBUS regulator nodes out of the GPIO controller node. This
    fixes a problem where the "regulator-fixed" driver wasn't probed for
    these regulators because the GPIO driver doesn't scan the child-nodes
    and based on the dt-bindings documentation it's not supposed to.
    
    This fixed the following error reported by Luca Olivetti:
      ...
      dwc2 1e101000.usb: DWC OTG Controller
      dwc2 1e101000.usb: new USB bus registered, assigned bus number 1
      dwc2 1e101000.usb: irq 62, io mem 0x1e101000
      dwc2 1e101000.usb: startup error -517
      dwc2 1e101000.usb: USB bus 1 deregistered
      dwc2 1e101000.usb: dwc2_hcd_init() FAILED, returning -517
    
    Fixes: FS#1634
    Cc: Luca Olivetti <luca at ventoso.org>
    Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
    [backported from 982468de35d499f85470b7b547d2b27cea53bae0]
    Signed-off-by: Luca Olivetti <luca at ventoso.org>
---
 .../files-4.14/arch/mips/boot/dts/ARV7510PW22.dts  | 24 +++++++++++-----------
 .../files-4.14/arch/mips/boot/dts/ARV7518PW.dts    | 24 +++++++++++-----------
 .../files-4.14/arch/mips/boot/dts/ARV752DPW.dts    | 24 +++++++++++-----------
 .../files-4.14/arch/mips/boot/dts/P2601HNFX.dts    | 24 +++++++++++-----------
 4 files changed, 48 insertions(+), 48 deletions(-)

diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7510PW22.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7510PW22.dts
index 92d01b4dcc..404502426f 100644
--- a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7510PW22.dts
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7510PW22.dts
@@ -74,6 +74,18 @@
 			gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB_VBUS";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 };
 
 &gpio {
@@ -115,18 +127,6 @@
 			lantiq,output = <0>;
 		};
 	};
-
-	usb_vbus: regulator-usb-vbus {
-		compatible = "regulator-fixed";
-
-		regulator-name = "USB_VBUS";
-
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-
-		gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
 };
 
 &gsw {
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7518PW.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7518PW.dts
index 72f3a686b5..62b67d40eb 100644
--- a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7518PW.dts
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7518PW.dts
@@ -106,6 +106,18 @@
 			gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB_VBUS";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 };
 
 &gpio {
@@ -146,18 +158,6 @@
 			lantiq,open-drain = <1>;
 		};
 	};
-
-	usb_vbus: regulator-usb-vbus {
-		compatible = "regulator-fixed";
-
-		regulator-name = "USB_VBUS";
-
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-
-		gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
 };
 
 &gpiomm {
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV752DPW.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV752DPW.dts
index 5f877723f6..214795025c 100644
--- a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV752DPW.dts
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV752DPW.dts
@@ -107,6 +107,18 @@
 			gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB_VBUS";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpiomm 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 };
 
 &gpio {
@@ -153,18 +165,6 @@
 			lantiq,open-drain = <1>;
 		};
 	};
-
-	usb_vbus: regulator-usb-vbus {
-		compatible = "regulator-fixed";
-
-		regulator-name = "USB_VBUS";
-
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-
-		gpio = <&gpiomm 0 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
 };
 
 &gpiomm {
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/P2601HNFX.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/P2601HNFX.dts
index 5606eb6e8b..bb872ad26a 100644
--- a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/P2601HNFX.dts
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/P2601HNFX.dts
@@ -97,6 +97,18 @@
 			gpios = <&gpio 50 GPIO_ACTIVE_HIGH>;
 		};
 	};
+
+	usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB_VBUS";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 };
 
 &gpio {
@@ -129,18 +141,6 @@
 			lantiq,function = "mdio";
 		};
 	};
-
-	usb_vbus: regulator-usb-vbus {
-		compatible = "regulator-fixed";
-
-		regulator-name = "USB_VBUS";
-
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-
-		gpio = <&gpio 9 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
 };
 
 &gsw {