[openwrt/openwrt] lantiq: dts: Move the &usb_vbus nodes out of &gpio

LEDE Commits lede-commits at lists.infradead.org
Mon Jul 6 14:23:43 EDT 2020


adrian pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/982468de35d499f85470b7b547d2b27cea53bae0

commit 982468de35d499f85470b7b547d2b27cea53bae0
Author: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
AuthorDate: Mon Jul 6 19:46:34 2020 +0200

    lantiq: dts: Move the &usb_vbus nodes out of &gpio
    
    Move the USB VBUS regulator nodes out of the GPIO controller node. This
    fixes a problem where the "regulator-fixed" driver wasn't probed for
    these regulators because the GPIO driver doesn't scan the child-nodes
    and based on the dt-bindings documentation it's not supposed to.
    
    This fixed the following error reported by Luca Olivetti:
      ...
      dwc2 1e101000.usb: DWC OTG Controller
      dwc2 1e101000.usb: new USB bus registered, assigned bus number 1
      dwc2 1e101000.usb: irq 62, io mem 0x1e101000
      dwc2 1e101000.usb: startup error -517
      dwc2 1e101000.usb: USB bus 1 deregistered
      dwc2 1e101000.usb: dwc2_hcd_init() FAILED, returning -517
    
    Fixes: FS#1634
    Cc: Luca Olivetti <luca at ventoso.org>
    Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
---
 .../mips/boot/dts/lantiq/ar9_zyxel_p-2601hn.dts    | 24 +++++++++++-----------
 .../dts/lantiq/danube_arcadyan_arv7510pw22.dts     | 24 +++++++++++-----------
 .../boot/dts/lantiq/danube_arcadyan_arv7518pw.dts  | 24 +++++++++++-----------
 .../boot/dts/lantiq/danube_arcadyan_arv752dpw.dts  | 24 +++++++++++-----------
 .../mips/boot/dts/lantiq/ar9_zyxel_p-2601hn.dts    | 24 +++++++++++-----------
 .../dts/lantiq/danube_arcadyan_arv7510pw22.dts     | 24 +++++++++++-----------
 .../boot/dts/lantiq/danube_arcadyan_arv7518pw.dts  | 24 +++++++++++-----------
 .../boot/dts/lantiq/danube_arcadyan_arv752dpw.dts  | 24 +++++++++++-----------
 8 files changed, 96 insertions(+), 96 deletions(-)

diff --git a/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/ar9_zyxel_p-2601hn.dts b/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/ar9_zyxel_p-2601hn.dts
index 79896c6478..267788319c 100644
--- a/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/ar9_zyxel_p-2601hn.dts
+++ b/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/ar9_zyxel_p-2601hn.dts
@@ -96,18 +96,6 @@
 			gpios = <&gpio 50 GPIO_ACTIVE_HIGH>;
 		};
 	};
-};
-
-&gpio {
-	pinctrl-names = "default";
-	pinctrl-0 = <&state_default>;
-
-	state_default: pinmux {
-		exin {
-			lantiq,groups = "exin1";
-			lantiq,function = "exin";
-		};
-	};
 
 	usb_vbus: regulator-usb-vbus {
 		compatible = "regulator-fixed";
@@ -122,6 +110,18 @@
 	};
 };
 
+&gpio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&state_default>;
+
+	state_default: pinmux {
+		exin {
+			lantiq,groups = "exin1";
+			lantiq,function = "exin";
+		};
+	};
+};
+
 &gsw {
 	phy-mode = "rmii";
 };
diff --git a/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7510pw22.dts b/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7510pw22.dts
index e5fd05fe40..063be778d4 100644
--- a/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7510pw22.dts
+++ b/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7510pw22.dts
@@ -73,6 +73,18 @@
 			gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB_VBUS";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 };
 
 &gpio {
@@ -102,18 +114,6 @@
 			lantiq,output = <0>;
 		};
 	};
-
-	usb_vbus: regulator-usb-vbus {
-		compatible = "regulator-fixed";
-
-		regulator-name = "USB_VBUS";
-
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-
-		gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
 };
 
 &gsw {
diff --git a/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7518pw.dts b/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7518pw.dts
index ae0d27a042..b5e8845576 100644
--- a/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7518pw.dts
+++ b/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7518pw.dts
@@ -105,6 +105,18 @@
 			gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB_VBUS";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 };
 
 &gpio {
@@ -132,18 +144,6 @@
 			lantiq,open-drain = <1>;
 		};
 	};
-
-	usb_vbus: regulator-usb-vbus {
-		compatible = "regulator-fixed";
-
-		regulator-name = "USB_VBUS";
-
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-
-		gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
 };
 
 /*
diff --git a/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/danube_arcadyan_arv752dpw.dts b/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/danube_arcadyan_arv752dpw.dts
index 7c51f31bad..5db5f314d9 100644
--- a/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/danube_arcadyan_arv752dpw.dts
+++ b/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/danube_arcadyan_arv752dpw.dts
@@ -108,6 +108,18 @@
 			gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB_VBUS";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpiomm 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 };
 
 &gpio {
@@ -142,18 +154,6 @@
 			lantiq,open-drain = <1>;
 		};
 	};
-
-	usb_vbus: regulator-usb-vbus {
-		compatible = "regulator-fixed";
-
-		regulator-name = "USB_VBUS";
-
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-
-		gpio = <&gpiomm 0 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
 };
 
 &gsw {
diff --git a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/ar9_zyxel_p-2601hn.dts b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/ar9_zyxel_p-2601hn.dts
index 79896c6478..267788319c 100644
--- a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/ar9_zyxel_p-2601hn.dts
+++ b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/ar9_zyxel_p-2601hn.dts
@@ -96,18 +96,6 @@
 			gpios = <&gpio 50 GPIO_ACTIVE_HIGH>;
 		};
 	};
-};
-
-&gpio {
-	pinctrl-names = "default";
-	pinctrl-0 = <&state_default>;
-
-	state_default: pinmux {
-		exin {
-			lantiq,groups = "exin1";
-			lantiq,function = "exin";
-		};
-	};
 
 	usb_vbus: regulator-usb-vbus {
 		compatible = "regulator-fixed";
@@ -122,6 +110,18 @@
 	};
 };
 
+&gpio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&state_default>;
+
+	state_default: pinmux {
+		exin {
+			lantiq,groups = "exin1";
+			lantiq,function = "exin";
+		};
+	};
+};
+
 &gsw {
 	phy-mode = "rmii";
 };
diff --git a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7510pw22.dts b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7510pw22.dts
index e5fd05fe40..063be778d4 100644
--- a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7510pw22.dts
+++ b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7510pw22.dts
@@ -73,6 +73,18 @@
 			gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB_VBUS";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 };
 
 &gpio {
@@ -102,18 +114,6 @@
 			lantiq,output = <0>;
 		};
 	};
-
-	usb_vbus: regulator-usb-vbus {
-		compatible = "regulator-fixed";
-
-		regulator-name = "USB_VBUS";
-
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-
-		gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
 };
 
 &gsw {
diff --git a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7518pw.dts b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7518pw.dts
index ae0d27a042..b5e8845576 100644
--- a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7518pw.dts
+++ b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube_arcadyan_arv7518pw.dts
@@ -105,6 +105,18 @@
 			gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB_VBUS";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 };
 
 &gpio {
@@ -132,18 +144,6 @@
 			lantiq,open-drain = <1>;
 		};
 	};
-
-	usb_vbus: regulator-usb-vbus {
-		compatible = "regulator-fixed";
-
-		regulator-name = "USB_VBUS";
-
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-
-		gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
 };
 
 /*
diff --git a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube_arcadyan_arv752dpw.dts b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube_arcadyan_arv752dpw.dts
index 7c51f31bad..5db5f314d9 100644
--- a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube_arcadyan_arv752dpw.dts
+++ b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube_arcadyan_arv752dpw.dts
@@ -108,6 +108,18 @@
 			gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB_VBUS";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpiomm 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 };
 
 &gpio {
@@ -142,18 +154,6 @@
 			lantiq,open-drain = <1>;
 		};
 	};
-
-	usb_vbus: regulator-usb-vbus {
-		compatible = "regulator-fixed";
-
-		regulator-name = "USB_VBUS";
-
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-
-		gpio = <&gpiomm 0 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
 };
 
 &gsw {



More information about the lede-commits mailing list