[source] firmware: add IPQ fritz-tools FW extraction tool
LEDE Commits
lede-commits at lists.infradead.org
Wed Mar 22 01:45:46 PDT 2017
blogic pushed a commit to source.git, branch master:
https://git.lede-project.org/aa47f5623a83be15949a080e77959f0f7db16041
commit aa47f5623a83be15949a080e77959f0f7db16041
Author: Christian Lamparter <chunkeey at googlemail.com>
AuthorDate: Wed Mar 15 11:48:56 2017 +0100
firmware: add IPQ fritz-tools FW extraction tool
Adds tools to access tffs3 and pre-calibration data required for ipq4019
based FritBoxes.
Signed-off-by: Christian Lamparter <chunkeey at googlemail.com>
---
package/firmware/fritz-tools/Makefile | 30 ++
package/firmware/fritz-tools/README.md | 50 +++
package/firmware/fritz-tools/src/CMakeLists.txt | 12 +
.../firmware/fritz-tools/src/fritz_cal_extract.c | 259 ++++++++++++++
package/firmware/fritz-tools/src/fritz_tffs_read.c | 375 +++++++++++++++++++++
5 files changed, 726 insertions(+)
diff --git a/package/firmware/fritz-tools/Makefile b/package/firmware/fritz-tools/Makefile
new file mode 100644
index 0000000..4891dca
--- /dev/null
+++ b/package/firmware/fritz-tools/Makefile
@@ -0,0 +1,30 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=fritz-tools
+PKG_RELEASE:=1
+CMAKE_INSTALL:=1
+PKG_FLAGS:=nonshared
+
+include $(INCLUDE_DIR)/package.mk
+include $(INCLUDE_DIR)/cmake.mk
+
+define Package/fritz-tools
+ SECTION:=firmware
+ CATEGORY:=Firmware
+ DEPENDS:=@TARGET_ipq806x +zlib
+ TITLE:=Utilites for accessing AVM Calibration data and TFFS
+endef
+
+define Package/fritz-tools/description
+ This package contains:
+ fritz_cal_extract.c: tool to extract WLAN calibration data.
+ fritz_tffs_read.c: partially read the TFFS filesystems.
+endef
+
+define Package/fritz-tools/install
+ $(INSTALL_DIR) $(1)/usr/bin
+ $(INSTALL_BIN) $(PKG_BUILD_DIR)/fritz_cal_extract $(1)/usr/bin/
+ $(INSTALL_BIN) $(PKG_BUILD_DIR)/fritz_tffs_read $(1)/usr/bin/
+endef
+
+$(eval $(call BuildPackage,fritz-tools))
diff --git a/package/firmware/fritz-tools/README.md b/package/firmware/fritz-tools/README.md
new file mode 100644
index 0000000..def237b
--- /dev/null
+++ b/package/firmware/fritz-tools/README.md
@@ -0,0 +1,50 @@
+Userspace utilties for accessing TFFS (a name-value storage usually found in AVM Fritz!Box based devices)
+
+## Building
+
+```
+mkdir build
+cd build
+cmake /path/to/fritz_tffs_tools
+make
+```
+
+## Usage
+
+All command line parameters are documented:
+```
+fritz_tffs_read -h
+```
+
+Show all entries from a TFFS partition dump (in the format: name=value):
+```
+fritz_tffs_read -i /path/to/tffs.dump -a
+```
+
+Read a TFFS partition and show all entries (in the format: name=value):
+```
+fritz_tffs_read -i /dev/mtdX -a
+```
+
+Output only the value of a specific key (this will only show the value):
+```
+fritz_tffs_read -i /dev/mtdX -n my_ipaddress
+```
+
+## LICENSE
+
+See `LICENSE`:
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
diff --git a/package/firmware/fritz-tools/src/CMakeLists.txt b/package/firmware/fritz-tools/src/CMakeLists.txt
new file mode 100644
index 0000000..116bca9
--- /dev/null
+++ b/package/firmware/fritz-tools/src/CMakeLists.txt
@@ -0,0 +1,12 @@
+cmake_minimum_required(VERSION 2.6)
+
+PROJECT(fritz-tools C)
+ADD_DEFINITIONS(-Wall -Werror --std=gnu99 -Wmissing-declarations)
+
+SET(CMAKE_SHARED_LIBRARY_LINK_C_FLAGS "")
+
+ADD_EXECUTABLE(fritz_tffs_read fritz_tffs_read.c)
+ADD_EXECUTABLE(fritz_cal_extract fritz_cal_extract.c)
+TARGET_LINK_LIBRARIES(fritz_cal_extract z)
+
+INSTALL(TARGETS fritz_tffs_read fritz_cal_extract RUNTIME DESTINATION bin)
diff --git a/package/firmware/fritz-tools/src/fritz_cal_extract.c b/package/firmware/fritz-tools/src/fritz_cal_extract.c
new file mode 100644
index 0000000..8156dfd
--- /dev/null
+++ b/package/firmware/fritz-tools/src/fritz_cal_extract.c
@@ -0,0 +1,259 @@
+/*
+ * A tool for reading the zlib compressed calibration data
+ * found in AVM Fritz!Box based devices).
+ *
+ * Copyright (c) 2017 Christian Lamparter <chunkeey at googlemail.com>
+ *
+ * Based on zpipe, which is an example of proper use of zlib's inflate().
+ * that is Not copyrighted -- provided to the public domain
+ * Version 1.4 11 December 2005 Mark Adler
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <assert.h>
+#include <unistd.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <endian.h>
+#include <errno.h>
+#include "zlib.h"
+
+#define CHUNK 1024
+
+static inline size_t special_min(size_t a, size_t b)
+{
+ return a == 0 ? b : (a < b ? a : b);
+}
+
+/* Decompress from file source to file dest until stream ends or EOF.
+ inf() returns Z_OK on success, Z_MEM_ERROR if memory could not be
+ allocated for processing, Z_DATA_ERROR if the deflate data is
+ invalid or incomplete, Z_VERSION_ERROR if the version of zlib.h and
+ the version of the library linked do not match, or Z_ERRNO if there
+ is an error reading or writing the files. */
+static int inf(FILE *source, FILE *dest, size_t limit, size_t skip)
+{
+ int ret;
+ size_t have;
+ z_stream strm;
+ unsigned char in[CHUNK];
+ unsigned char out[CHUNK];
+
+ /* allocate inflate state */
+ strm.zalloc = Z_NULL;
+ strm.zfree = Z_NULL;
+ strm.opaque = Z_NULL;
+ strm.avail_in = 0;
+ strm.next_in = Z_NULL;
+ ret = inflateInit(&strm);
+ if (ret != Z_OK)
+ return ret;
+
+ /* decompress until deflate stream ends or end of file */
+ do {
+ strm.avail_in = fread(in, 1, CHUNK, source);
+ if (ferror(source)) {
+ (void)inflateEnd(&strm);
+ return Z_ERRNO;
+ }
+ if (strm.avail_in == 0)
+ break;
+ strm.next_in = in;
+
+ /* run inflate() on input until output buffer not full */
+ do {
+ strm.avail_out = CHUNK;
+ strm.next_out = out;
+ ret = inflate(&strm, Z_NO_FLUSH);
+ assert(ret != Z_STREAM_ERROR); /* state not clobbered */
+ switch (ret) {
+ case Z_NEED_DICT:
+ ret = Z_DATA_ERROR; /* and fall through */
+ case Z_DATA_ERROR:
+ case Z_MEM_ERROR:
+ (void)inflateEnd(&strm);
+ return ret;
+ }
+ have = special_min(limit, CHUNK - strm.avail_out) - skip;
+ if (fwrite(&out[skip], have, 1, dest) != 1 || ferror(dest)) {
+ (void)inflateEnd(&strm);
+ return Z_ERRNO;
+ }
+ skip = 0;
+ limit -= have;
+ } while (strm.avail_out == 0 && limit > 0);
+
+ /* done when inflate() says it's done */
+ } while (ret != Z_STREAM_END && limit > 0);
+
+ /* clean up and return */
+ (void)inflateEnd(&strm);
+ return (limit == 0 ? Z_OK : (ret == Z_STREAM_END ? Z_OK : Z_DATA_ERROR));
+}
+
+/* report a zlib or i/o error */
+static void zerr(int ret)
+{
+ switch (ret) {
+ case Z_ERRNO:
+ if (ferror(stdin))
+ fputs("error reading stdin\n", stderr);
+ if (ferror(stdout))
+ fputs("error writing stdout\n", stderr);
+ break;
+ case Z_STREAM_ERROR:
+ fputs("invalid compression level\n", stderr);
+ break;
+ case Z_DATA_ERROR:
+ fputs("invalid or incomplete deflate data\n", stderr);
+ break;
+ case Z_MEM_ERROR:
+ fputs("out of memory\n", stderr);
+ break;
+ case Z_VERSION_ERROR:
+ fputs("zlib version mismatch!\n", stderr);
+ }
+}
+
+static unsigned int get_num(char *str)
+{
+ if (!strncmp("0x", str, 2))
+ return strtoul(str+2, NULL, 16);
+ else
+ return strtoul(str, NULL, 10);
+}
+
+static void usage(void)
+{
+ fprintf(stderr, "Usage: fritz_cal_extract [-s seek offset] [-i skip] [-o output file] [-l limit] [infile] -e entry_id\n"
+ "Finds and extracts zlib compressed calibration data in the EVA loader\n");
+ exit(EXIT_FAILURE);
+}
+
+struct cal_entry {
+ uint16_t id;
+ uint16_t len;
+} __attribute__((packed));
+
+/* compress or decompress from stdin to stdout */
+int main(int argc, char **argv)
+{
+ struct cal_entry cal = { .len = 0 };
+ FILE *in = stdin;
+ FILE *out = stdout;
+ size_t limit = 0, skip = 0;
+ int initial_offset = 0;
+ int entry = -1;
+ int ret;
+ int opt;
+
+ while ((opt = getopt(argc, argv, "s:e:o:l:i:")) != -1) {
+ switch (opt) {
+ case 's':
+ initial_offset = (int)get_num(optarg);
+ if (errno) {
+ perror("Failed to parse seek offset");
+ goto out_bad;
+ }
+ break;
+ case 'e':
+ entry = (int) htobe16(get_num(optarg));
+ if (errno) {
+ perror("Failed to entry id");
+ goto out_bad;
+ }
+ break;
+ case 'o':
+ out = fopen(optarg, "w");
+ if (!out) {
+ perror("Failed to create output file");
+ goto out_bad;
+ }
+ break;
+ case 'l':
+ limit = (size_t)get_num(optarg);
+ if (errno) {
+ perror("Failed to parse limit");
+ goto out_bad;
+ }
+ break;
+ case 'i':
+ skip = (size_t)get_num(optarg);
+ if (errno) {
+ perror("Failed to parse skip");
+ goto out_bad;
+ }
+ break;
+ default: /* '?' */
+ usage();
+ }
+ }
+
+ if (entry == -1)
+ usage();
+
+ if (argc > 1 && optind <= argc) {
+ in = fopen(argv[optind], "r");
+ if (!in) {
+ perror("Failed to create output file");
+ goto out_bad;
+ }
+ }
+
+ if (initial_offset) {
+ ret = fseek(in, initial_offset, SEEK_CUR);
+ if (ret) {
+ perror("Failed to seek to calibration table");
+ goto out_bad;
+ }
+ }
+
+ do {
+ ret = fseek(in, be16toh(cal.len), SEEK_CUR);
+ if (feof(in)) {
+ fprintf(stderr, "Reached end of file, but didn't find the matching entry\n");
+ goto out_bad;
+ } else if (ferror(in)) {
+ perror("Failure during seek");
+ goto out_bad;
+ }
+
+ ret = fread(&cal, 1, sizeof cal, in);
+ if (ret != sizeof cal)
+ goto out_bad;
+ } while (entry != cal.id || cal.id == 0xffff);
+
+ if (cal.id == 0xffff) {
+ fprintf(stderr, "Reached end of filesystem, but didn't find the matching entry\n");
+ goto out_bad;
+ }
+
+ ret = inf(in, out, limit, skip);
+ if (ret == Z_OK)
+ goto out;
+
+ zerr(ret);
+
+out_bad:
+ ret = EXIT_FAILURE;
+
+out:
+ fclose(in);
+ fclose(out);
+ return ret;
+}
diff --git a/package/firmware/fritz-tools/src/fritz_tffs_read.c b/package/firmware/fritz-tools/src/fritz_tffs_read.c
new file mode 100644
index 0000000..f367e02
--- /dev/null
+++ b/package/firmware/fritz-tools/src/fritz_tffs_read.c
@@ -0,0 +1,375 @@
+/*
+ * A tool for reading the TFFS partitions (a name-value storage usually
+ * found in AVM Fritz!Box based devices).
+ *
+ * Copyright (c) 2015-2016 Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+ *
+ * Based on the TFFS 2.0 kernel driver from AVM:
+ * Copyright (c) 2004-2007 AVM GmbH <fritzbox_info at avm.de>
+ * and the OpenWrt TFFS kernel driver:
+ * Copyright (c) 2013 John Crispin <blogic at openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <string.h>
+#include <libgen.h>
+#include <getopt.h>
+#include <unistd.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <arpa/inet.h>
+
+#define DEFAULT_TFFS_SIZE (256 * 1024)
+
+#define TFFS_ID_END 0xffff
+#define TFFS_ID_TABLE_NAME 0x01ff
+
+static char *progname;
+static char *input_file;
+static unsigned long tffs_size = DEFAULT_TFFS_SIZE;
+static char *name_filter = NULL;
+static bool show_all = false;
+static bool print_all_key_names = false;
+static bool swap_bytes = false;
+
+struct tffs_entry_header {
+ uint16_t id;
+ uint16_t len;
+};
+
+struct tffs_entry {
+ const struct tffs_entry_header *header;
+ char *name;
+ uint8_t *val;
+};
+
+struct tffs_name_table_entry {
+ const uint32_t *id;
+ const char *val;
+};
+
+struct tffs_key_name_table {
+ uint32_t size;
+ struct tffs_name_table_entry *entries;
+};
+
+static inline uint16_t get_header_len(const struct tffs_entry_header *header)
+{
+ if (swap_bytes)
+ return ntohs(header->len);
+
+ return header->len;
+}
+
+static inline uint16_t get_header_id(const struct tffs_entry_header *header)
+{
+ if (swap_bytes)
+ return ntohs(header->id);
+
+ return header->id;
+}
+
+static inline uint16_t to_entry_header_id(uint32_t name_id)
+{
+ if (swap_bytes)
+ return ntohl(name_id) & 0xffff;
+
+ return name_id & 0xffff;
+}
+
+static inline uint32_t get_walk_size(uint32_t entry_len)
+{
+ return (entry_len + 3) & ~0x03;
+}
+
+static void print_entry_value(const struct tffs_entry *entry)
+{
+ int i;
+
+ /* These are NOT NULL terminated. */
+ for (i = 0; i < get_header_len(entry->header); i++)
+ fprintf(stdout, "%c", entry->val[i]);
+}
+
+static void parse_entry(uint8_t *buffer, uint32_t pos,
+ struct tffs_entry *entry)
+{
+ entry->header = (struct tffs_entry_header *) &buffer[pos];
+ entry->val = &buffer[pos + sizeof(struct tffs_entry_header)];
+}
+
+static int find_entry(uint8_t *buffer, uint16_t id, struct tffs_entry *entry)
+{
+ uint32_t pos = 0;
+
+ do {
+ parse_entry(buffer, pos, entry);
+
+ if (get_header_id(entry->header) == id)
+ return 1;
+
+ pos += sizeof(struct tffs_entry_header);
+ pos += get_walk_size(get_header_len(entry->header));
+ } while (pos < tffs_size && entry->header->id != TFFS_ID_END);
+
+ return 0;
+}
+
+static void parse_key_names(struct tffs_entry *names_entry,
+ struct tffs_key_name_table *key_names)
+{
+ uint32_t pos = 0, i = 0;
+ struct tffs_name_table_entry *name_item;
+
+ key_names->entries = calloc(sizeof(*name_item), 1);
+
+ do {
+ name_item = &key_names->entries[i];
+
+ name_item->id = (uint32_t *) &names_entry->val[pos];
+ pos += sizeof(*name_item->id);
+ name_item->val = (const char *) &names_entry->val[pos];
+
+ /*
+ * There is no "length" field because the string values are
+ * simply NULL-terminated -> strlen() gives us the size.
+ */
+ pos += get_walk_size(strlen(name_item->val) + 1);
+
+ ++i;
+ key_names->entries = realloc(key_names->entries,
+ sizeof(*name_item) * (i + 1));
+ } while (pos < get_header_len(names_entry->header));
+
+ key_names->size = i;
+}
+
+static void show_all_key_names(struct tffs_key_name_table *key_names)
+{
+ int i;
+
+ for (i = 0; i < key_names->size; i++)
+ printf("%s\n", key_names->entries[i].val);
+}
+
+static int show_all_key_value_pairs(uint8_t *buffer,
+ struct tffs_key_name_table *key_names)
+{
+ int i, has_value = 0;
+ uint16_t id;
+ struct tffs_entry tmp;
+
+ for (i = 0; i < key_names->size; i++) {
+ id = to_entry_header_id(*key_names->entries[i].id);
+
+ if (find_entry(buffer, id, &tmp)) {
+ printf("%s=", key_names->entries[i].val);
+ print_entry_value(&tmp);
+ printf("\n");
+ has_value++;
+ }
+ }
+
+ if (!has_value) {
+ fprintf(stderr, "ERROR: no values found!\n");
+ return EXIT_FAILURE;
+ }
+
+ return EXIT_SUCCESS;
+}
+
+static int show_matching_key_value(uint8_t *buffer,
+ struct tffs_key_name_table *key_names)
+{
+ int i;
+ uint16_t id;
+ struct tffs_entry tmp;
+ const char *name;
+
+ for (i = 0; i < key_names->size; i++) {
+ name = key_names->entries[i].val;
+
+ if (strncmp(name, name_filter, strlen(name)) == 0) {
+ id = to_entry_header_id(*key_names->entries[i].id);
+
+ if (find_entry(buffer, id, &tmp)) {
+ print_entry_value(&tmp);
+ printf("\n");
+ return EXIT_SUCCESS;
+ } else {
+ fprintf(stderr,
+ "ERROR: no value found for name %s!\n",
+ name);
+ return EXIT_FAILURE;
+ }
+ }
+ }
+
+ fprintf(stderr, "ERROR: Unknown key name %s!\n", name_filter);
+ return EXIT_FAILURE;
+}
+
+static void usage(int status)
+{
+ FILE *stream = (status != EXIT_SUCCESS) ? stderr : stdout;
+
+ fprintf(stream, "Usage: %s [OPTIONS...]\n", progname);
+ fprintf(stream,
+ "\n"
+ "Options:\n"
+ " -a list all key value pairs found in the TFFS file/device\n"
+ " -b swap bytes while parsing the TFFS file/device\n"
+ " -h show this screen\n"
+ " -i <file> inspect the given TFFS file/device <file>\n"
+ " -l list all supported keys\n"
+ " -n <key name> display the value of the given key\n"
+ " -s <size> the (max) size of the TFFS file/device <size>\n"
+ );
+
+ exit(status);
+}
+
+static int file_exist(char *filename)
+{
+ struct stat buffer;
+
+ return stat(filename, &buffer) == 0;
+}
+
+static void parse_options(int argc, char *argv[])
+{
+ while (1)
+ {
+ int c;
+
+ c = getopt(argc, argv, "abhi:ln:s");
+ if (c == -1)
+ break;
+
+ switch (c) {
+ case 'a':
+ show_all = true;
+ name_filter = NULL;
+ print_all_key_names = false;
+ break;
+ case 'b':
+ swap_bytes = 1;
+ break;
+ case 'h':
+ usage(EXIT_SUCCESS);
+ break;
+ case 'i':
+ input_file = optarg;
+ break;
+ case 'l':
+ print_all_key_names = true;
+ show_all = false;
+ name_filter = NULL;
+ break;
+ case 'n':
+ name_filter = optarg;
+ show_all = false;
+ print_all_key_names = false;
+ break;
+ case 's':
+ tffs_size = strtoul(optarg, NULL, 0);
+ break;
+ default:
+ usage(EXIT_FAILURE);
+ break;
+ }
+ }
+
+ if (!input_file) {
+ fprintf(stderr, "ERROR: No input file (-i <file>) given!\n");
+ exit(EXIT_FAILURE);
+ }
+
+ if (!file_exist(input_file)) {
+ fprintf(stderr, "ERROR: %s does not exist\n", input_file);
+ exit(EXIT_FAILURE);
+ }
+
+ if (!show_all && !name_filter && !print_all_key_names) {
+ fprintf(stderr,
+ "ERROR: either -l, -a or -n <key name> is required!\n");
+ exit(EXIT_FAILURE);
+ }
+}
+
+int main(int argc, char *argv[])
+{
+ int ret = EXIT_FAILURE;
+ uint8_t *buffer;
+ FILE *fp;
+ struct tffs_entry name_table;
+ struct tffs_key_name_table key_names;
+
+ progname = basename(argv[0]);
+
+ parse_options(argc, argv);
+
+ fp = fopen(input_file, "r");
+
+ if (!fp) {
+ fprintf(stderr, "ERROR: Failed to open tffs input file %s\n",
+ input_file);
+ goto out;
+ }
+
+ buffer = malloc(tffs_size);
+
+ if (fread(buffer, 1, tffs_size, fp) != tffs_size) {
+ fprintf(stderr, "ERROR: Failed read tffs file %s\n",
+ input_file);
+ goto out_free;
+ }
+
+ if (!find_entry(buffer, TFFS_ID_TABLE_NAME, &name_table)) {
+ fprintf(stderr,"ERROR: No name table found in tffs file %s\n",
+ input_file);
+ fprintf(stderr," Is byte-swapping (-b) required?\n");
+ goto out_free;
+ }
+
+ parse_key_names(&name_table, &key_names);
+ if (key_names.size < 1) {
+ fprintf(stderr, "ERROR: No name table found in tffs file %s\n",
+ input_file);
+ goto out_free_names;
+ }
+
+ if (print_all_key_names) {
+ show_all_key_names(&key_names);
+ ret = EXIT_SUCCESS;
+ } else if (show_all) {
+ ret = show_all_key_value_pairs(buffer, &key_names);
+ } else {
+ ret = show_matching_key_value(buffer, &key_names);
+ }
+
+out_free_names:
+ free(key_names.entries);
+out_free:
+ fclose(fp);
+ free(buffer);
+out:
+ return ret;
+}
More information about the lede-commits
mailing list