[source] ar71xx: add support for RB mAP L-2nD
LEDE Commits
lede-commits at lists.infradead.org
Wed Feb 15 02:29:07 PST 2017
nbd pushed a commit to source.git, branch master:
https://git.lede-project.org/c59fa94eeecf16c79254ab4bc78f5b31c7387039
commit c59fa94eeecf16c79254ab4bc78f5b31c7387039
Author: Thibaut VARENE <hacks at slashdirt.org>
AuthorDate: Tue Feb 7 12:06:33 2017 +0100
ar71xx: add support for RB mAP L-2nD
This patch adds support for the MikroTik RouterBOARD mAP lite
https://routerboard.com/RBmAPL-2nD
Specifications:
- SoC: Qualcomm QCA9533 (650MHz)
- RAM: 64MB
- Storage: 16MB NOR SPI flash
- Wireless: builtin QCA9533, 2x2:2
- Ethernet: 1x100M
This is another 16M SPI NOR mikrotik device. The machine file is named
mach-rbspi.c because I plan to add support for several of the other spi-based
RouterBOARD devices in subsequent patches: they share most of the hardware
and thus the same codebase.
Signed-off-by: Thibaut VARENE <hacks at slashdirt.org>
---
target/linux/ar71xx/base-files/etc/board.d/01_leds | 5 +
.../linux/ar71xx/base-files/etc/board.d/02_network | 1 +
target/linux/ar71xx/base-files/etc/diag.sh | 3 +-
target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 +
.../ar71xx/base-files/lib/upgrade/platform.sh | 7 +-
target/linux/ar71xx/config-4.4 | 1 +
.../ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 13 +
target/linux/ar71xx/files/arch/mips/ath79/Makefile | 1 +
.../ar71xx/files/arch/mips/ath79/mach-rbspi.c | 279 +++++++++++++++++++++
.../linux/ar71xx/files/arch/mips/ath79/machtypes.h | 1 +
target/linux/ar71xx/image/mikrotik.mk | 2 +-
target/linux/ar71xx/mikrotik/config-default | 1 +
12 files changed, 313 insertions(+), 4 deletions(-)
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index ab8585c..5aa49c9 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -236,6 +236,11 @@ rb-2011uias-2hnd)
ucidef_set_led_switch "eth9" "ETH9" "rb:green:eth9" "switch1" "0x04"
ucidef_set_led_switch "eth10" "ETH10" "rb:green:eth10" "switch1" "0x02"
;;
+rb-mapl-2nd)
+ ucidef_set_led_default "power" "POWER" "rb:green:power" "1"
+ ucidef_set_led_netdev "lan" "LAN" "rb:green:eth" "eth0"
+ ucidef_set_led_wlan "wlan" "WLAN" "rb:green:wlan" "phy0tpt"
+ ;;
dap-2695-a1)
ucidef_set_led_default "power" "POWER" "d-link:green:power" "1"
ucidef_set_led_default "diag" "DIAG" "d-link:red:power" "0"
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 14bb34b..f3dcd90 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -90,6 +90,7 @@ ar71xx_setup_interfaces()
rb-911g-5hpnd|\
rb-912uag-2hpnd|\
rb-912uag-5hpnd|\
+ rb-mapl-2nd|\
rb-sxt2n|\
rb-sxt5n|\
re450|\
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index a407a99..f9d394b 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -297,7 +297,8 @@ get_status_led() {
rb-911g-5hpacd|\
rb-911g-5hpnd|\
rb-912uag-2hpnd|\
- rb-912uag-5hpnd)
+ rb-912uag-5hpnd|\
+ rb-mapl-2nd)
status_led="rb:green:user"
;;
rb-951ui-2hnd | rb-941-2nd)
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index d51260d..066f8eb 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -883,6 +883,9 @@ ar71xx_board_detect() {
*"RouterBOARD 2011UiAS-2HnD")
name="rb-2011uias-2hnd"
;;
+ *"RouterBOARD mAP L-2nD")
+ name="rb-mapl-2nd"
+ ;;
*"RouterBOARD SXT Lite2")
name="rb-sxt2n"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index f227bf8..43515fe 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -344,6 +344,7 @@ platform_check_image() {
pb42|\
pb44|\
rb-941-2nd|\
+ rb-mapl-2nd|\
routerstation-pro|\
routerstation|\
wp543|\
@@ -615,7 +616,8 @@ platform_pre_upgrade() {
local board=$(ar71xx_board_name)
case "$board" in
- rb-941-2nd)
+ rb-941-2nd|\
+ rb-mapl-2nd)
;;
rb*|\
c-60|\
@@ -651,7 +653,8 @@ platform_do_upgrade() {
local board=$(ar71xx_board_name)
case "$board" in
- rb-941-2nd)
+ rb-941-2nd|\
+ rb-mapl-2nd)
PLATFORM_DO_UPGRADE_COMBINED_SEPARATE_MTD=1
platform_do_upgrade_combined "$ARGV"
;;
diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index 3902aee..060931a 100644
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -149,6 +149,7 @@ CONFIG_ATH79_MACH_R6100=y
# CONFIG_ATH79_MACH_RB922 is not set
# CONFIG_ATH79_MACH_RB941 is not set
# CONFIG_ATH79_MACH_RB95X is not set
+# CONFIG_ATH79_MACH_RBSPI is not set
# CONFIG_ATH79_MACH_RBSXTLITE is not set
CONFIG_ATH79_MACH_RE450=y
CONFIG_ATH79_MACH_RW2458N=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index 14490e2..3474cb8 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -924,6 +924,19 @@ config ATH79_MACH_RB2011
select ATH79_DEV_WMAC
select ATH79_ROUTERBOOT
+config ATH79_MACH_RBSPI
+ bool "MikroTik RouterBOARD SPI-NOR support"
+ select SOC_QCA953X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+ select ATH79_ROUTERBOOT
+ help
+ Say 'Y' here if you want your kernel to support the
+ MikroTik RouterBOARD mAP lite
+
config ATH79_MACH_RBSXTLITE
bool "MikroTik RouterBOARD SXT Lite"
select SOC_AR934X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index aab8d6e..e0748b1 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -153,6 +153,7 @@ obj-$(CONFIG_ATH79_MACH_RB91X) += mach-rb91x.o
obj-$(CONFIG_ATH79_MACH_RB922) += mach-rb922.o
obj-$(CONFIG_ATH79_MACH_RB941) += mach-rb941.o
obj-$(CONFIG_ATH79_MACH_RB95X) += mach-rb95x.o
+obj-$(CONFIG_ATH79_MACH_RBSPI) += mach-rbspi.o
obj-$(CONFIG_ATH79_MACH_RBSXTLITE) += mach-rbsxtlite.o
obj-$(CONFIG_ATH79_MACH_RE450) += mach-re450.o
obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c
new file mode 100644
index 0000000..3f154b4
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c
@@ -0,0 +1,279 @@
+/*
+ * MikroTik SPI-NOR RouterBOARDs support
+ *
+ * - MikroTik RouterBOARD mAP L-2nD
+ *
+ * Copyright (C) 2017 Thibaut VARENE <varenet at parisc-linux.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/phy.h>
+#include <linux/routerboot.h>
+#include <linux/gpio.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/prom.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ath79.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-spi.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "routerboot.h"
+
+#define RBSPI_KEYS_POLL_INTERVAL 20 /* msecs */
+#define RBSPI_KEYS_DEBOUNCE_INTERVAL (3 * RBSPI_KEYS_POLL_INTERVAL)
+
+#define RBSPI_HAS_USB BIT(0)
+#define RBSPI_HAS_WLAN BIT(1)
+#define RBSPI_HAS_WAN4 BIT(2) /* has WAN port on PHY4 */
+
+#define RB_ROUTERBOOT_OFFSET 0x0000
+#define RB_BIOS_SIZE 0x1000
+#define RB_SOFT_CFG_SIZE 0x1000
+#define RB_KERNEL_SIZE (2 * 1024 * 1024) /* 2MB kernel */
+
+/* Flash partitions indexes */
+enum {
+ RBSPI_PART_RBOOT,
+ RBSPI_PART_HCONF,
+ RBSPI_PART_BIOS,
+ RBSPI_PART_RBOOT2,
+ RBSPI_PART_SCONF,
+ RBSPI_PART_KERN,
+ RBSPI_PART_ROOT,
+ RBSPI_PARTS
+};
+
+static struct mtd_partition rbspi_spi_partitions[RBSPI_PARTS];
+
+/*
+ * Setup the SPI flash partition table based on initial parsing.
+ * The kernel can be at any aligned position and have any size.
+ * The size of the kernel partition is the desired RB_KERNEL_SIZE
+ * minus the size of the preceding partitions (128KB).
+ */
+static void __init rbspi_init_partitions(const struct rb_info *info)
+{
+ struct mtd_partition *parts = rbspi_spi_partitions;
+ memset(parts, 0x0, sizeof(*parts));
+
+ parts[RBSPI_PART_RBOOT].name = "routerboot";
+ parts[RBSPI_PART_RBOOT].offset = RB_ROUTERBOOT_OFFSET;
+ parts[RBSPI_PART_RBOOT].size = info->hard_cfg_offs;
+ parts[RBSPI_PART_RBOOT].mask_flags = MTD_WRITEABLE;
+
+ parts[RBSPI_PART_HCONF].name = "hard_config";
+ parts[RBSPI_PART_HCONF].offset = info->hard_cfg_offs;
+ parts[RBSPI_PART_HCONF].size = info->hard_cfg_size;
+ parts[RBSPI_PART_HCONF].mask_flags = MTD_WRITEABLE;
+
+ parts[RBSPI_PART_BIOS].name = "bios";
+ parts[RBSPI_PART_BIOS].offset = info->hard_cfg_offs
+ + info->hard_cfg_size;
+ parts[RBSPI_PART_BIOS].size = RB_BIOS_SIZE;
+ parts[RBSPI_PART_BIOS].mask_flags = MTD_WRITEABLE;
+
+ parts[RBSPI_PART_RBOOT2].name = "routerboot2";
+ parts[RBSPI_PART_RBOOT2].offset = parts[RBSPI_PART_BIOS].offset
+ + RB_BIOS_SIZE;
+ parts[RBSPI_PART_RBOOT2].size = info->soft_cfg_offs
+ - parts[RBSPI_PART_RBOOT2].offset;
+ parts[RBSPI_PART_RBOOT2].mask_flags = MTD_WRITEABLE;
+
+ parts[RBSPI_PART_SCONF].name = "soft_config";
+ parts[RBSPI_PART_SCONF].offset = info->soft_cfg_offs;
+ parts[RBSPI_PART_SCONF].size = RB_SOFT_CFG_SIZE;
+
+ parts[RBSPI_PART_KERN].name = "kernel";
+ parts[RBSPI_PART_KERN].offset = parts[RBSPI_PART_SCONF].offset
+ + parts[RBSPI_PART_SCONF].size;
+ parts[RBSPI_PART_KERN].size = RB_KERNEL_SIZE
+ - parts[RBSPI_PART_KERN].offset;
+
+ parts[RBSPI_PART_ROOT].name = "rootfs";
+ parts[RBSPI_PART_ROOT].offset = parts[RBSPI_PART_KERN].offset
+ + parts[RBSPI_PART_KERN].size;
+ parts[RBSPI_PART_ROOT].size = MTDPART_SIZ_FULL;
+}
+
+static struct flash_platform_data rbspi_spi_flash_data = {
+ .parts = rbspi_spi_partitions,
+ .nr_parts = ARRAY_SIZE(rbspi_spi_partitions),
+};
+
+/* Several boards only have a single reset button wired to GPIO 16 */
+#define RBSPI_GPIO_BTN_RESET16 16
+
+static struct gpio_keys_button rbspi_gpio_keys_reset16[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = RBSPI_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = RBSPI_GPIO_BTN_RESET16,
+ .active_low = 1,
+ },
+};
+
+/* RB mAP L-2nD gpios */
+#define RBMAPL_GPIO_LED_POWER 17
+#define RBMAPL_GPIO_LED_USER 14
+#define RBMAPL_GPIO_LED_ETH 4
+#define RBMAPL_GPIO_LED_WLAN 11
+
+static struct gpio_led rbmapl_leds[] __initdata = {
+ {
+ .name = "rb:green:power",
+ .gpio = RBMAPL_GPIO_LED_POWER,
+ .active_low = 0,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ }, {
+ .name = "rb:green:user",
+ .gpio = RBMAPL_GPIO_LED_USER,
+ .active_low = 0,
+ }, {
+ .name = "rb:green:eth",
+ .gpio = RBMAPL_GPIO_LED_ETH,
+ .active_low = 0,
+ }, {
+ .name = "rb:green:wlan",
+ .gpio = RBMAPL_GPIO_LED_WLAN,
+ .active_low = 0,
+ },
+};
+
+void __init rbspi_wlan_init(int wmac_offset)
+{
+ char *art_buf;
+ u8 wlan_mac[ETH_ALEN];
+
+ art_buf = rb_get_wlan_data();
+ if (!art_buf)
+ return;
+
+ ath79_init_mac(wlan_mac, ath79_mac_base, wmac_offset);
+ ath79_register_wmac(art_buf + 0x1000, wlan_mac);
+
+ kfree(art_buf);
+}
+
+/*
+ * Common platform init routine for all SPI NOR devices.
+ */
+static int __init rbspi_platform_setup(void)
+{
+ const struct rb_info *info;
+ char buf[64];
+
+ info = rb_init_info((void *)(KSEG1ADDR(AR71XX_SPI_BASE)), 0x20000);
+ if (!info)
+ return -ENODEV;
+
+ scnprintf(buf, sizeof(buf), "MikroTik %s",
+ (info->board_name) ? info->board_name : "");
+ mips_set_machine_name(buf);
+
+ /* fix partitions based on flash parsing */
+ rbspi_init_partitions(info);
+
+ return 0;
+}
+
+/*
+ * Common peripherals init routine for all SPI NOR devices.
+ * Sets SPI and USB.
+ */
+static void __init rbspi_peripherals_setup(u32 flags)
+{
+ ath79_register_m25p80(&rbspi_spi_flash_data);
+
+ if (flags & RBSPI_HAS_USB)
+ ath79_register_usb();
+}
+
+/*
+ * Common network init routine for all SPI NOR devices.
+ * Sets LAN/WAN/WLAN.
+ */
+static void __init rbspi_network_setup(u32 flags, int gmac1_offset,
+ int wmac_offset)
+{
+ /* for QCA953x that will init mdio1_device/data */
+ ath79_register_mdio(0, 0x0);
+
+ if (flags & RBSPI_HAS_WAN4) {
+ ath79_setup_ar934x_eth_cfg(0);
+
+ /* set switch to oper mode 1, PHY4 connected to CPU */
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_switch_data.phy_poll_mask |= BIT(4);
+
+ /* init GMAC0 connected to PHY4 at 100M */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = BIT(4);
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_register_eth(0);
+ } else {
+ /* set the SoC to SW_ONLY_MODE, which connects all PHYs
+ * to the internal switch.
+ * We hijack ath79_setup_ar934x_eth_cfg() to set the switch in
+ * the QCA953x, this works because this configuration bit is
+ * the same as the AR934x. There's no equivalent function for
+ * QCA953x for now. */
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
+ }
+
+ /* init GMAC1 */
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, gmac1_offset);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_register_eth(1);
+
+ if (flags & RBSPI_HAS_WLAN)
+ rbspi_wlan_init(wmac_offset);
+}
+
+/*
+ * Init the mAP lite hardware.
+ * The mAP L-2nD (mAP lite) has a single ethernet port, connected to PHY0.
+ * Trying to use GMAC0 in direct mode was unsucessful, so we're
+ * using SW_ONLY_MODE, which connects PHY0 to MAC1 on the internal
+ * switch, which is connected to GMAC1 on the SoC. GMAC0 is unused.
+ */
+static void __init rbmapl_setup(void)
+{
+ u32 flags = RBSPI_HAS_WLAN;
+
+ if (rbspi_platform_setup())
+ return;
+
+ rbspi_peripherals_setup(flags);
+
+ /* GMAC1 is HW MAC, WLAN MAC is HW MAC + 1 */
+ rbspi_network_setup(flags, 0, 1);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(rbmapl_leds), rbmapl_leds);
+
+ /* mAP lite has a single reset button as gpio 16 */
+ ath79_register_gpio_keys_polled(-1, RBSPI_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(rbspi_gpio_keys_reset16),
+ rbspi_gpio_keys_reset16);
+
+ /* clear internal multiplexing */
+ ath79_gpio_output_select(RBMAPL_GPIO_LED_ETH, AR934X_GPIO_OUT_GPIO);
+ ath79_gpio_output_select(RBMAPL_GPIO_LED_POWER, AR934X_GPIO_OUT_GPIO);
+}
+
+MIPS_MACHINE_NONAME(ATH79_MACH_RB_MAPL, "map-hb", rbmapl_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 00ceef3..706663c 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -173,6 +173,7 @@ enum ath79_mach_type {
ATH79_MACH_RB_941, /* MikroTik RouterBOARD 941-2nD */
ATH79_MACH_RB_951G, /* Mikrotik RouterBOARD 951G */
ATH79_MACH_RB_951U, /* Mikrotik RouterBOARD 951Ui-2HnD */
+ ATH79_MACH_RB_MAPL, /* Mikrotik RouterBOARD mAP L-2nD */
ATH79_MACH_RB_SXTLITE2ND, /* Mikrotik RouterBOARD SXT Lite 2nD */
ATH79_MACH_RB_SXTLITE5ND, /* Mikrotik RouterBOARD SXT Lite 5nD */
ATH79_MACH_RE450, /* TP-LINK RE450 */
diff --git a/target/linux/ar71xx/image/mikrotik.mk b/target/linux/ar71xx/image/mikrotik.mk
index 939544d..bcfa768 100644
--- a/target/linux/ar71xx/image/mikrotik.mk
+++ b/target/linux/ar71xx/image/mikrotik.mk
@@ -25,7 +25,7 @@ endef
TARGET_DEVICES += nand-64m nand-large
define Device/rb-nor-flash-16M
- DEVICE_TITLE := MikroTik RouterBoard with 16 MB NOR flash
+ DEVICE_TITLE := MikroTik RouterBoard with 16 MB SPI NOR flash
DEVICE_PACKAGES := rbcfg
BLOCKSIZE := 64k
IMAGE_SIZE := 16000k
diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default
index a55952d..a8af0e7 100644
--- a/target/linux/ar71xx/mikrotik/config-default
+++ b/target/linux/ar71xx/mikrotik/config-default
@@ -114,6 +114,7 @@ CONFIG_ATH79_MACH_RB91X=y
CONFIG_ATH79_MACH_RB922=y
CONFIG_ATH79_MACH_RB941=y
CONFIG_ATH79_MACH_RB95X=y
+CONFIG_ATH79_MACH_RBSPI=y
CONFIG_ATH79_MACH_RBSXTLITE=y
# CONFIG_ATH79_MACH_RE450 is not set
# CONFIG_ATH79_MACH_RW2458N is not set
More information about the lede-commits
mailing list