[source] ar71xx: provide support for RB-941-2nD via mach-rbspi.c
LEDE Commits
lede-commits at lists.infradead.org
Wed Feb 15 02:29:08 PST 2017
nbd pushed a commit to source.git, branch master:
https://git.lede-project.org/b18bae37a4f26949f71f1345caa2b6934f6a4663
commit b18bae37a4f26949f71f1345caa2b6934f6a4663
Author: Thibaut VARENE <hacks at slashdirt.org>
AuthorDate: Tue Feb 7 15:23:30 2017 +0100
ar71xx: provide support for RB-941-2nD via mach-rbspi.c
This patch implements support for the hAP lite in mach-rbspi.c
hAP lite was supported via mach-rb941.c, so this file is removed
as well as the corresponding build bits.
Signed-off-by: Thibaut VARENE <hacks at slashdirt.org>
---
target/linux/ar71xx/base-files/etc/board.d/01_leds | 2 +-
target/linux/ar71xx/base-files/etc/diag.sh | 3 +-
target/linux/ar71xx/config-4.4 | 1 -
.../ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 11 +-
.../ar71xx/files/arch/mips/ath79/mach-rb941.c | 173 ---------------------
.../ar71xx/files/arch/mips/ath79/mach-rbspi.c | 39 +++++
target/linux/ar71xx/image/mikrotik.mk | 8 +-
target/linux/ar71xx/mikrotik/config-default | 1 -
8 files changed, 44 insertions(+), 194 deletions(-)
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 5aa49c9..1d692ff 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -223,7 +223,7 @@ rb-750)
ucidef_set_led_switch "port5" "port5" "rb750:green:port5" "switch0" "0x02"
;;
rb-941-2nd)
- ucidef_set_led_timer "act" "act" "rb:green:act" "1000" "1000"
+ ucidef_set_led_timer "user" "USR/ACT" "rb:green:user" "1000" "1000"
;;
rb-2011l|\
rb-2011uas|\
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index f9d394b..527e8b7 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -298,10 +298,11 @@ get_status_led() {
rb-911g-5hpnd|\
rb-912uag-2hpnd|\
rb-912uag-5hpnd|\
+ rb-941-2nd|\
rb-mapl-2nd)
status_led="rb:green:user"
;;
- rb-951ui-2hnd | rb-941-2nd)
+ rb-951ui-2hnd)
status_led="rb:green:act"
;;
rb-sxt2n|\
diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index 060931a..b9f80a5 100644
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -147,7 +147,6 @@ CONFIG_ATH79_MACH_R6100=y
# CONFIG_ATH79_MACH_RB750 is not set
# CONFIG_ATH79_MACH_RB91X is not set
# CONFIG_ATH79_MACH_RB922 is not set
-# CONFIG_ATH79_MACH_RB941 is not set
# CONFIG_ATH79_MACH_RB95X is not set
# CONFIG_ATH79_MACH_RBSPI is not set
# CONFIG_ATH79_MACH_RBSXTLITE is not set
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index 3474cb8..9bca451 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -895,16 +895,6 @@ config ATH79_MACH_RB922
select ATH79_ROUTERBOOT
select RLE_DECOMPRESS
-config ATH79_MACH_RB941
- bool "MikroTik RouterBOARD 941-2nd support"
- select SOC_QCA953X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
- select ATH79_ROUTERBOOT
-
config ATH79_MACH_RB95X
bool "MikroTik RouterBOARD 95X support"
select SOC_AR934X
@@ -936,6 +926,7 @@ config ATH79_MACH_RBSPI
help
Say 'Y' here if you want your kernel to support the
MikroTik RouterBOARD mAP lite
+ MikroTik RouterBOARD hAP lite
config ATH79_MACH_RBSXTLITE
bool "MikroTik RouterBOARD SXT Lite"
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb941.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb941.c
deleted file mode 100644
index 5da950b..0000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb941.c
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * MikroTik RouterBOARD 941-2nD support
- *
- * Copyright (C) 2016 Sergey Sergeev <adron at yapic.net>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/export.h>
-#include <linux/pci.h>
-#include <linux/ath9k_platform.h>
-#include <linux/platform_device.h>
-#include <linux/phy.h>
-#include <linux/ar8216_platform.h>
-#include <linux/rle.h>
-#include <linux/routerboot.h>
-#include <linux/gpio.h>
-
-#include <linux/mtd/mtd.h>
-//#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/irq.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-spi.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-//#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "routerboot.h"
-
-#define RB941_GPIO_LED_ACT 14
-#define RB941_GPIO_BTN_RESET 16
-
-#define RB941_KEYS_POLL_INTERVAL 20 /* msecs */
-#define RB941_KEYS_DEBOUNCE_INTERVAL (3 * RB941_KEYS_POLL_INTERVAL)
-
-#define RB_ROUTERBOOT_OFFSET 0x0000
-#define RB_ROUTERBOOT_SIZE 0xe000
-#define RB_HARD_CFG_OFFSET 0xe000
-#define RB_HARD_CFG_SIZE 0x1000
-#define RB_BIOS_OFFSET 0xf000
-#define RB_BIOS_SIZE 0x1000
-#define RB_ROUTERBOOT2_OFFSET 0x10000
-#define RB_ROUTERBOOT2_SIZE 0xf000
-#define RB_SOFT_CFG_OFFSET 0x1f000
-#define RB_SOFT_CFG_SIZE 0x1000
-#define RB_ROOTFS_OFFSET 0x20000
-#define RB_ROOTFS_SIZE 0x9e0000
-#define RB_KERNEL_OFFSET 0xa00000
-#define RB_KERNEL_SIZE MTDPART_SIZ_FULL
-
-void __init rb941_wlan_init(void)
-{
- char *art_buf;
- u8 wlan_mac[ETH_ALEN];
-
- art_buf = rb_get_wlan_data();
- if (art_buf == NULL)
- return;
-
- ath79_init_mac(wlan_mac, ath79_mac_base, 11);
- ath79_register_wmac(art_buf + 0x1000, wlan_mac);
-
- kfree(art_buf);
-}
-
-static struct mtd_partition rb941_spi_partitions[] = {
- {
- .name = "routerboot",
- .offset = RB_ROUTERBOOT_OFFSET,
- .mask_flags = MTD_WRITEABLE,
- .size = RB_ROUTERBOOT_SIZE,
- }, {
- .name = "hard_config",
- .offset = RB_HARD_CFG_OFFSET,
- .size = RB_HARD_CFG_SIZE,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "bios",
- .offset = RB_BIOS_OFFSET,
- .size = RB_BIOS_SIZE,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "routerboot2",
- .offset = RB_ROUTERBOOT2_OFFSET,
- .size = RB_ROUTERBOOT2_SIZE,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "soft_config",
- .offset = RB_SOFT_CFG_OFFSET,
- .size = RB_SOFT_CFG_SIZE,
- }, {
- .name = "rootfs",
- .offset = RB_ROOTFS_OFFSET,
- .size = RB_ROOTFS_SIZE,
- }, {
- .name = "kernel",
- .offset = RB_KERNEL_OFFSET,
- .size = RB_KERNEL_SIZE,
- }
-};
-
-static struct flash_platform_data rb941_spi_flash_data = {
- .parts = rb941_spi_partitions,
- .nr_parts = ARRAY_SIZE(rb941_spi_partitions),
-};
-
-static struct gpio_led rb941_leds[] __initdata = {
- {
- .name = "rb:green:act",
- .gpio = RB941_GPIO_LED_ACT,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button rb941_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = RB941_KEYS_DEBOUNCE_INTERVAL,
- .gpio = RB941_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static void __init rb941_setup(void)
-{
- const struct rb_info *info;
- //try to get rb_info data
- info = rb_init_info((void *)(KSEG1ADDR(AR71XX_SPI_BASE)), 0x20000);
- if (!info){
- pr_err("%s: Can't get rb_info data from flash!\n", __func__);
- //return -EINVAL; //Not critical ... continue!
- }
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
- ath79_register_m25p80(&rb941_spi_flash_data);
- ath79_register_mdio(0, 0x0);
-
- /* WAN. We have no WAN. Only LAN. */
- /*ath79_switch_data.phy4_mii_en = 1;
- ath79_switch_data.phy_poll_mask = BIT(4);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
- ath79_register_eth(0); */
-
- /* LAN */
- ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_register_eth(1);
-
- //ath79_register_usb();
-
- rb941_wlan_init();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(rb941_leds), rb941_leds);
- ath79_register_gpio_keys_polled(-1, RB941_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(rb941_gpio_keys),
- rb941_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_RB_941, "H951L", "MikroTik RouterBOARD 941-2nD", rb941_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c
index 3f154b4..5418652 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c
@@ -2,6 +2,7 @@
* MikroTik SPI-NOR RouterBOARDs support
*
* - MikroTik RouterBOARD mAP L-2nD
+ * - MikroTik RouterBOARD 941L-2nD
*
* Copyright (C) 2017 Thibaut VARENE <varenet at parisc-linux.org>
*
@@ -155,6 +156,16 @@ static struct gpio_led rbmapl_leds[] __initdata = {
},
};
+/* RB 941L-2nD gpios */
+#define RBHAPL_GPIO_LED_USER 14
+static struct gpio_led rbhapl_leds[] __initdata = {
+ {
+ .name = "rb:green:user",
+ .gpio = RBHAPL_GPIO_LED_USER,
+ .active_low = 1,
+ },
+};
+
void __init rbspi_wlan_init(int wmac_offset)
{
char *art_buf;
@@ -276,4 +287,32 @@ static void __init rbmapl_setup(void)
ath79_gpio_output_select(RBMAPL_GPIO_LED_POWER, AR934X_GPIO_OUT_GPIO);
}
+/*
+ * Init the hAP lite hardware.
+ * The 941-2nD (hAP lite) has 4 ethernet ports, with port 2-4
+ * being assigned to LAN on the casing, and port 1 being assigned
+ * to "internet" (WAN) on the casing. Port 1 is connected to PHY3.
+ * Since WAN is neither PHY0 nor PHY4, we cannot use GMAC0 with this device.
+ */
+static void __init rbhapl_setup(void)
+{
+ u32 flags = RBSPI_HAS_WLAN;
+
+ if (rbspi_platform_setup())
+ return;
+
+ rbspi_peripherals_setup(flags);
+
+ /* GMAC1 is HW MAC, WLAN MAC is HW MAC + 4 */
+ rbspi_network_setup(flags, 0, 4);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(rbhapl_leds), rbhapl_leds);
+
+ /* hAP lite has a single reset button as gpio 16 */
+ ath79_register_gpio_keys_polled(-1, RBSPI_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(rbspi_gpio_keys_reset16),
+ rbspi_gpio_keys_reset16);
+}
+
MIPS_MACHINE_NONAME(ATH79_MACH_RB_MAPL, "map-hb", rbmapl_setup);
+MIPS_MACHINE_NONAME(ATH79_MACH_RB_941, "H951L", rbhapl_setup);
diff --git a/target/linux/ar71xx/image/mikrotik.mk b/target/linux/ar71xx/image/mikrotik.mk
index bcfa768..c7cf15d 100644
--- a/target/linux/ar71xx/image/mikrotik.mk
+++ b/target/linux/ar71xx/image/mikrotik.mk
@@ -37,10 +37,4 @@ define Device/rb-nor-flash-16M
IMAGE/sysupgrade.bin = append-rootfs | pad-rootfs | combined-image | check-size $$$$(IMAGE_SIZE)
endef
-define Device/rb-941-2nd
-$(Device/rb-nor-flash-16M)
- DEVICE_TITLE := hAP lite
- BOARDNAME:= rb-941-2nd
-endef
-
-TARGET_DEVICES += rb-nor-flash-16M rb-941-2nd
+TARGET_DEVICES += rb-nor-flash-16M
diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default
index a8af0e7..62ff5a5 100644
--- a/target/linux/ar71xx/mikrotik/config-default
+++ b/target/linux/ar71xx/mikrotik/config-default
@@ -112,7 +112,6 @@ CONFIG_ATH79_MACH_RB4XX=y
CONFIG_ATH79_MACH_RB750=y
CONFIG_ATH79_MACH_RB91X=y
CONFIG_ATH79_MACH_RB922=y
-CONFIG_ATH79_MACH_RB941=y
CONFIG_ATH79_MACH_RB95X=y
CONFIG_ATH79_MACH_RBSPI=y
CONFIG_ATH79_MACH_RBSXTLITE=y
More information about the lede-commits
mailing list