[FS#321] BTHomeHub5 Type A dsl_notify.sh fails to set LED
LEDE Bugs
lede-bugs at lists.infradead.org
Sat Dec 3 09:48:43 PST 2016
A new Flyspray task has been opened. Details are below.
User who did this - Mauro Mozzarelli (ezplanet)
Attached to Project - LEDE Project
Summary - BTHomeHub5 Type A dsl_notify.sh fails to set LED
Task Type - Bug Report
Category - Base system
Status - Unconfirmed
Assigned To -
Operating System - All
Severity - Medium
Priority - Very Low
Reported Version - Trunk
Due in Version - Undecided
Due Date - Undecided
Details - Device: BTHomeHub5 Type A
Software Version: LEDE r2391 to latest (I have not tried LEDE releases prior to 2391).
Steps to reproduce: connect to ADSL line
Problem: the RED DSL LED should flash according to the status of the DSL line (HANDSHAKE, TRAINING, UP) as managed by /sbin/dsl_notify.sh however the LED remains off all the time.
It was working perfectly in OpenWrt. I switched only 2 days ago to LEDE and I found this issue.
I have seen some differences in /sbin/dsl_control.sh (I tried also to replace the LEDE version with the old OpenWrt code without success, possibly because of the dependencies on various "includes").
Setting the LED manually by poking directly into /sys/class/leds/bthomehubv5a:red:broadband it behaves correctly, thus hardware and kernel problems can be excluded.
More information can be found at the following URL:
https://bugs.lede-project.org/index.php?do=details&task_id=321
More information about the lede-bugs
mailing list