[PATCH 2/3] tests: remove monitor interface tests

[Johannes Berg]

From: Johannes Berg <johannes.berg at intel.com>

Remove the tests that explicitly test the use of cooked
monitor interfaces for AP mode.

Signed-off-by: Johannes Berg <johannes.berg at intel.com>
---
 tests/hwsim/test_monitor_interface.py | 94 ---------------------------
 1 file changed, 94 deletions(-)
 delete mode 100644 tests/hwsim/test_monitor_interface.py

diff --git a/tests/hwsim/test_monitor_interface.py b/tests/hwsim/test_monitor_interface.py
deleted file mode 100644
index e1a48aeb0c1e..000000000000
--- a/tests/hwsim/test_monitor_interface.py
+++ /dev/null
@@ -1,94 +0,0 @@
-# AP mode using the older monitor interface design
-# Copyright (c) 2013, Jouni Malinen <j at w1.fi>
-#
-# This software may be distributed under the terms of the BSD license.
-# See README for more details.
-
-import binascii
-from remotehost import remote_compatible
-import logging
-logger = logging.getLogger()
-import time
-
-import hwsim_utils
-import hostapd
-from wpasupplicant import WpaSupplicant
-from utils import radiotap_build, start_monitor, stop_monitor
-
-def test_monitor_iface_open(dev, apdev):
-    """Open connection using cfg80211 monitor interface on AP"""
-    wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
-    wpas.interface_add("wlan5", drv_params="use_monitor=1")
-    id = wpas.add_network()
-    wpas.set_network(id, "mode", "2")
-    wpas.set_network_quoted(id, "ssid", "monitor-iface")
-    wpas.set_network(id, "key_mgmt", "NONE")
-    wpas.set_network(id, "frequency", "2412")
-    wpas.connect_network(id)
-
-    dev[0].connect("monitor-iface", key_mgmt="NONE", scan_freq="2412")
-
-def test_monitor_iface_wpa2_psk(dev, apdev):
-    """WPA2-PSK connection using cfg80211 monitor interface on AP"""
-    wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
-    wpas.interface_add("wlan5", drv_params="use_monitor=1")
-    id = wpas.add_network()
-    wpas.set_network(id, "mode", "2")
-    wpas.set_network_quoted(id, "ssid", "monitor-iface-wpa2")
-    wpas.set_network(id, "proto", "WPA2")
-    wpas.set_network(id, "key_mgmt", "WPA-PSK")
-    wpas.set_network_quoted(id, "psk", "12345678")
-    wpas.set_network(id, "pairwise", "CCMP")
-    wpas.set_network(id, "group", "CCMP")
-    wpas.set_network(id, "frequency", "2412")
-    wpas.connect_network(id)
-
-    dev[0].connect("monitor-iface-wpa2", psk="12345678", scan_freq="2412")
-
-def test_monitor_iface_multi_bss(dev, apdev):
-    """AP mode mmonitor interface with hostapd multi-BSS setup"""
-    params = {"ssid": "monitor-iface", "driver_params": "use_monitor=1"}
-    hapd = hostapd.add_ap(apdev[0], params)
-    hostapd.add_bss(apdev[0], apdev[0]['ifname'] + '-2', 'bss-2.conf')
-    dev[0].connect("monitor-iface", key_mgmt="NONE", scan_freq="2412")
-    dev[1].connect("bss-2", key_mgmt="NONE", scan_freq="2412")
-
- at remote_compatible
-def test_monitor_iface_unknown_sta(dev, apdev):
-    """AP mode monitor interface and Data frame from unknown STA"""
-    ssid = "monitor-iface-pmf"
-    passphrase = "12345678"
-    params = hostapd.wpa2_params(ssid=ssid, passphrase=passphrase)
-    params["wpa_key_mgmt"] = "WPA-PSK-SHA256"
-    params["ieee80211w"] = "2"
-    params['driver_params'] = "use_monitor=1"
-    hapd = hostapd.add_ap(apdev[0], params)
-
-    bssid = apdev[0]['bssid']
-    addr = dev[0].p2p_interface_addr()
-    dev[0].connect(ssid, psk=passphrase, ieee80211w="2",
-                   key_mgmt="WPA-PSK-SHA256", proto="WPA2",
-                   scan_freq="2412")
-    dev[0].request("DROP_SA")
-    # This protected Deauth will be ignored by the STA
-    hapd.request("DEAUTHENTICATE " + addr)
-    # But the unprotected Deauth from TX frame-from-unassoc-STA will now be
-    # processed
-    try:
-        sock = start_monitor(apdev[1]["ifname"])
-        radiotap = radiotap_build()
-
-        bssid = hapd.own_addr().replace(':', '')
-        addr = dev[0].own_addr().replace(':', '')
-
-        # Inject Data frame from STA to AP since we not have SA in place
-        # anymore for normal data TX
-        frame = binascii.unhexlify("48010000" + bssid + addr + bssid + "0000")
-        sock.send(radiotap + frame)
-    finally:
-        stop_monitor(apdev[1]["ifname"])
-
-    ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=5)
-    if ev is None:
-        raise Exception("No disconnection")
-    dev[0].request("DISCONNECT")
-- 
2.48.1