hostapd / eaptls / IOS 10.2

[Andreas Hartmann]

On 03/22/2018 at 03:29 PM Andreas Hartmann wrote:
> On 03/22/2018 at 11:50 AM Andreas Hartmann wrote:
>> Hello all!
>>
>> Since years I'm using hostapd with EAPTLS for WLAN and never had any
>> problem with Linux, Android or Windowsclients.
>>
>> I'm now trying to configure an iPhone (iOS 10.2) to use EAPTLS, too. I
>> installed the CA and the client crt. That seems to be all fine. But
>> connection isn't possible. Hostapd prints out:
>>
>> IEEE 802.11: No WPA/RSN IE in association request
>>
>> Does iOS 10.2 need some special configuration in hostapd to get it working?
> 
> Problem seems to be, that iOS 10.2 can't handle WPA2 !?
> If I'm setting wpa=1 (normally I'm using wpa=2), it can connect. But
> with wpa=3 (enabling WPA and WPA2) it doesn't work, too - I would have
> expected, that this would work.

=> iOS 10.2 can't handle
- a list of wpa_key_mgmt methods
- WPA-EAP-SHA256

It only handles WPA_EAP (with eaptls).

>>
>> Thanks,
>> Andreas
> 
> _______________________________________________
> Hostap mailing list
> Hostap at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/hostap
>