[BUG] wpa_supplicant in SAE mode kills AP on same PHY

[Jouni Malinen]

On Thu, Feb 23, 2017 at 03:13:36PM +0100, Charlemagne Lasse wrote:
> I found a weird problem in LEDE 17.01 with an ath9k device and
> reported it at https://bugs.lede-project.org/index.php?do=details&task_id=550
> . But it looks like it is a bug in hostapd/wpa_supplicant because I
> cannot reproduce it when using authsae.
> 
> Test setup is a bridge with two devices in it. One encrypted AP and
> one encrypted mesh point. Both devices are using the same ath9k phy.
> 
> I did the tests with the attached files placed under /va/run/. The
> following steps were done. Both hostapd and wpa_supplicant were run on
> different terminals

Can you produce debug logs from both wpa_supplicant and hostapd for
this?

-- 
Jouni Malinen                                            PGP id EFC895FA