Help debug my authentication issue? (Part 1)

[Frank Rizzo]

On Thu, 15 Oct 2015 15:51:22 -0700, Jouni Malinen <j at w1.fi> wrote:

> On Thu, Oct 15, 2015 at 03:05:12PM -0700, Frank Rizzo wrote:
>> interface=wlan0
>> bridge=br0
>> driver=nl80211
>
> Which WLAN driver and hardware are you using?

Network controller: Intel Corporation Wireless 7265 (rev 59)

configuration: broadcast=yes driver=iwlwifi  
driverversion=3.13.0-62-generic firmware=22.24.8.0 latency=0 link=no  
multicast=yes wireless=IEEE 802.11abgn

>> I have that bridge defined, but I can easily remove it if that's a
>> test that you think would reveal something.  Ultimately, it'll be
>> tablets talking to the host over a VLAN.
>
> Yes, I would start with the bridge removed from the picture for the test
> until the AP is shown to be capable of receiving EAPOL frames. Linux
> bridge is one of the most common reasons for this failing.

(testing now)