ibss mode with wpa2 encryption?

[Ben Greear]

I'm trying to get ath9k NICs to do wpa2 encryption on ibss
networks with the config below.  I do not see any obvious errors
in the supplicant logs, but it will not pass traffic.

Is this supposed to work?  The peer station has a similar setup.

ctrl_interface=/var/run/wpa_supplicant
fast_reauth=1
concurrent_assoc_ok=1
scan_cur_freq=1
min_scan_gap=5
freq_list=2462

bss_max_count=2000
network={
    ssid="ben-138"
    disable_ht=0
    disable_vht=1
    ieee80211w=0
    disable_ht40=0
    disable_sgi=0
    ht_mcs=""
    disable_max_amsdu=-1
    ampdu_factor=-1
    ampdu_density=-1
    freq_list=2462

    mode=1
    frequency=2462
    proto=RSN
    key_mgmt=WPA-PSK
    #psk="ben-138-pwd"
    psk=fb926ec0b8c1467c29553d3241b03af31360b5c2a16d1640b2c151d12b70dc76
    pairwise=NONE
    group=TKIP
    proactive_key_caching=0

}


Thanks,
Ben

-- 
Ben Greear <greearb at candelatech.com>
Candela Technologies Inc  http://www.candelatech.com