Unable to set my channel with hostapd
Jonathan Bither
jonbither
Mon Apr 29 07:49:29 PDT 2013
This actually looks like a rather old release of OpenWRT. There have
since been updates with drivers and regulatory. I would try the latest
snapshot to see if the issue is resolved.
On 04/29/2013 08:00 AM, Francisco Cuesta wrote:
> When I start the router
>
>
> Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993
> [ 8.900000] Backport based on wireless-testing.git master-2012-09-07
> [ 8.900000] compat.git: wireless-testing.git
> [ 8.930000] cfg80211: Calling CRDA to update world regulatory domain
> [ 8.930000] cfg80211: World regulatory domain updated:
> [ 8.940000] cfg80211: (start_freq - end_freq @ bandwidth),
> (max_antenna_gain, max_eirp)
> [ 9.200000] usbcore: registered new interface driver usbfs
> [ 9.210000] usbcore: registered new interface driver hub
> [ 9.220000] usbcore: registered new device driver usb
> [ 9.660000] ath: EEPROM regdomain: 0x0
> [ 9.660000] ath: EEPROM indicates default country code should be used
> [ 9.660000] ath: doing EEPROM country->regdmn map search
> [ 9.660000] ath: country maps to regdmn code: 0x3a
> [ 9.660000] ath: Country alpha2 being used: US
> [ 9.660000] ath: Regpair used: 0x3a
> [ 9.660000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
> [ 9.660000] Registered led device: ath9k-phy0
> [ 9.660000] ieee80211 phy0: Atheros AR9340 Rev:0 mem=0xb8100000, irq=47
> [ 9.670000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
> [ 9.680000] ath: EEPROM regdomain: 0x0
> [ 9.680000] ath: EEPROM indicates default country code should be used
> [ 9.680000] ath: doing EEPROM country->regdmn map search
> [ 9.680000] ath: country maps to regdmn code: 0x3a
> [ 9.680000] ath: Country alpha2 being used: US
> [ 9.680000] ath: Regpair used: 0x3a
> [ 9.680000] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
> [ 9.690000] Registered led device: ath9k-phy1
> [ 9.690000] ieee80211 phy1: Atheros AR9300 Rev:4 mem=0xb0000000, irq=40
> [ 9.700000] cfg80211: Calling CRDA for country: US
> [ 9.700000] cfg80211: Regulatory domain changed to country: US
> [ 9.710000] cfg80211: (start_freq - end_freq @ bandwidth),
> (max_antenna_gain, max_eirp)
> [ 9.710000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
> (300 mBi, 2700 mBm)
> [ 9.720000] cfg80211: (4400000 KHz - 4940000 KHz @ 40000 KHz),
> (N/A, 3100 mBm)
> [ 9.730000] cfg80211: (4910000 KHz - 4990000 KHz @ 20000 KHz),
> (N/A, 3100 mBm)
> [ 9.740000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz),
> (N/A, 3100 mBm)
> [ 9.740000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz),
> (N/A, 3100 mBm)
> [ 9.750000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz),
> (N/A, 3100 mBm)
> [ 9.760000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz),
> (N/A, 3100 mBm)
> [ 9.770000] cfg80211: (5735000 KHz - 6480000 KHz @ 40000 KHz),
> (N/A, 3100 mBm)
> [ 9.770000] cfg80211: (4490000 KHz - 4910000 KHz @ 40000 KHz),
> (N/A, 3100 mBm)
> [ 9.780000] cfg80211: (2212000 KHz - 2720000 KHz @ 40000 KHz),
> (N/A, 3100 mBm)
>
>
> This is the dmesg output after typing wifi
>
> [ 4472.280000] cfg80211: Calling CRDA for country: US
> [ 4472.290000] cfg80211: Regulatory domain changed to country: US
> [ 4472.290000] cfg80211: (start_freq - end_freq @ bandwidth),
> (max_antenna_gain, max_eirp)
> [ 4472.300000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
> (300 mBi, 2700 mBm)
> [ 4472.310000] cfg80211: (4400000 KHz - 4940000 KHz @ 40000 KHz),
> (N/A, 3100 mBm)
> [ 4472.310000] cfg80211: (4910000 KHz - 4990000 KHz @ 20000 KHz),
> (N/A, 3100 mBm)
> [ 4472.320000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz),
> (N/A, 3100 mBm)
> [ 4472.330000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz),
> (N/A, 3100 mBm)
> [ 4472.340000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz),
> (N/A, 3100 mBm)
> [ 4472.350000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz),
> (N/A, 3100 mBm)
> [ 4472.350000] cfg80211: (5735000 KHz - 6480000 KHz @ 40000 KHz),
> (N/A, 3100 mBm)
> [ 4472.360000] cfg80211: (4490000 KHz - 4910000 KHz @ 40000 KHz),
> (N/A, 3100 mBm)
> [ 4472.370000] cfg80211: (2212000 KHz - 2720000 KHz @ 40000 KHz),
> (N/A, 3100 mBm)
> [ 4473.950000] device wlan0 entered promiscuous mode
> [ 4474.010000] device wlan0 left promiscuous mode
> [ 4474.020000] br-lan: port 2(wlan0) entered disabled state
> [ 4474.890000] device wlan1 entered promiscuous mode
> [ 4474.940000] device wlan1 left promiscuous mode
> [ 4474.950000] br-lan: port 2(wlan1) entered disabled state
> [ 4523.910000] device wlan0 entered promiscuous mode
> [ 4523.970000] device wlan0 left promiscuous mode
> [ 4523.980000] br-lan: port 2(wlan0) entered disabled state
> [ 4524.860000] device wlan1 entered promiscuous mode
> [ 4524.910000] device wlan1 left promiscuous mode
> [ 4524.920000] br-lan: port 2(wlan1) entered disabled state
> [ 5691.400000] device wlan0 entered promiscuous mode
> [ 5691.460000] br-lan: port 2(wlan0) entered forwarding state
> [ 5691.470000] br-lan: port 2(wlan0) entered forwarding state
> [ 5693.470000] br-lan: port 2(wlan0) entered forwarding state
> [ 5694.680000] device wlan1 entered promiscuous mode
> [ 5694.730000] device wlan1 left promiscuous mode
> [ 5694.740000] br-lan: port 3(wlan1) entered disabled state
> [ 5716.660000] device wlan0 left promiscuous mode
> [ 5716.660000] br-lan: port 2(wlan0) entered disabled state
> [ 5717.540000] device wlan0 entered promiscuous mode
> [ 5717.610000] br-lan: port 2(wlan0) entered forwarding state
> [ 5717.620000] br-lan: port 2(wlan0) entered forwarding state
> [ 5719.620000] br-lan: port 2(wlan0) entered forwarding state
> [ 5720.640000] device wlan1 entered promiscuous mode
> [ 5720.690000] device wlan1 left promiscuous mode
> [ 5720.700000] br-lan: port 3(wlan1) entered disabled state
> [ 6787.000000] device wlan0 left promiscuous mode
> [ 6787.000000] br-lan: port 2(wlan0) entered disabled state
> [ 6787.900000] device wlan0 entered promiscuous mode
> [ 6787.960000] br-lan: port 2(wlan0) entered forwarding state
> [ 6787.970000] br-lan: port 2(wlan0) entered forwarding state
> [ 6789.970000] br-lan: port 2(wlan0) entered forwarding state
> [ 6790.980000] device wlan1 entered promiscuous mode
> [ 6791.030000] device wlan1 left promiscuous mode
> [ 6791.040000] br-lan: port 3(wlan1) entered disabled state
> [ 6832.140000] device wlan0 left promiscuous mode
> [ 6832.140000] br-lan: port 2(wlan0) entered disabled state
> [ 6834.080000] device wlan0 entered promiscuous mode
> [ 6834.150000] device wlan0 left promiscuous mode
> [ 6834.150000] br-lan: port 2(wlan0) entered disabled state
> [ 6834.930000] device wlan1 entered promiscuous mode
> [ 6834.980000] device wlan1 left promiscuous mode
> [ 6834.990000] br-lan: port 2(wlan1) entered disabled state
> [ 6850.440000] device wlan0 entered promiscuous mode
> [ 6850.500000] device wlan0 left promiscuous mode
> [ 6850.510000] br-lan: port 2(wlan0) entered disabled state
> [ 6851.370000] device wlan1 entered promiscuous mode
> [ 6851.430000] device wlan1 left promiscuous mode
> [ 6851.430000] br-lan: port 2(wlan1) entered disabled state
> [ 6855.600000] device wlan0 entered promiscuous mode
> [ 6855.660000] device wlan0 left promiscuous mode
> [ 6855.660000] br-lan: port 2(wlan0) entered disabled state
> [ 6856.530000] device wlan1 entered promiscuous mode
> [ 6856.580000] device wlan1 left promiscuous mode
> [ 6856.580000] br-lan: port 2(wlan1) entered disabled state
> [11581.430000] device wlan0 entered promiscuous mode
> [11581.490000] device wlan0 left promiscuous mode
> [11581.490000] br-lan: port 2(wlan0) entered disabled state
> [11582.230000] device wlan1 entered promiscuous mode
> [11582.300000] device wlan1 left promiscuous mode
> [11582.300000] br-lan: port 2(wlan1) entered disabled state
> [12851.970000] device wlan0 entered promiscuous mode
> [12852.040000] device wlan0 left promiscuous mode
> [12852.040000] br-lan: port 2(wlan0) entered disabled state
> [12852.670000] device wlan1 entered promiscuous mode
> [12852.730000] device wlan1 left promiscuous mode
> [12852.730000] br-lan: port 2(wlan1) entered disabled state
> [13765.840000] device wlan0 entered promiscuous mode
> [13765.920000] device wlan0 left promiscuous mode
> [13765.920000] br-lan: port 2(wlan0) entered disabled state
> [13766.540000] device wlan1 entered promiscuous mode
> [13766.600000] device wlan1 left promiscuous mode
> [13766.610000] br-lan: port 2(wlan1) entered disabled state
>
> 2013/4/29 Krishna Chaitanya <chaitanya.mgit at gmail.com>:
>> On Mon, Apr 29, 2013 at 2:59 PM, Francisco Cuesta <ndarkness at gmail.com> wrote:
>>>
>>> By the way, is there any function in hostapd that maps the frequency
>>> to channels and channels to frequency? if so, could anyone tell me
>>> where they're located?
>>>
>>> thanks in advance!
>>>
>>> 2013/4/29 Francisco Cuesta <ndarkness at gmail.com>:
>>>> Hi Luciano,
>>>>
>>>> Thanks in advance,
>>>>
>>>> I have modified my regulatory data base for USA in order to be able to
>>>> use that channel
>>>>
>>>> iw reg get
>>>> country US:
>>>> (2412 - 2484 @ 40), (3, 27)
>>>> (4400 - 4940 @ 40), (N/A, 31)
>>>> (4910 - 4990 @ 20), (N/A, 31)
>>>> (5170 - 5250 @ 40), (N/A, 31)
>>>> (5250 - 5330 @ 40), (N/A, 31), DFS
>>>> (5490 - 5600 @ 40), (N/A, 31), DFS
>>>> (5650 - 5710 @ 40), (N/A, 31), DFS
>>>> (5735 - 6480 @ 40), (N/A, 31)
>>>>
>>>> But even though, I was getting the same error, do you have another good idea?
>>>>
>>>> thanks again!
>>>>
>>>>
>>>>
>>>>
>>>> 2013/4/29 Luciano Coelho <coelho at ti.com>:
>>>>> On Mon, 2013-04-29 at 12:01 +0300, Luciano Coelho wrote:
>>>>>> Hi Francisco,
>>>>>>
>>>>>> On Mon, 2013-04-29 at 10:27 +0200, Francisco Cuesta wrote:
>>>>>>> Hello, thanks for replying,
>>>>>>>
>>>>>>> I'm using ath9k driver in openwrt with hostapd v2.0-devel.
>>>>>>>
>>>>>>> iw reg get
>>>>>>> (2412 - 2472 @ 40), (3, 27)
>>>>>>> (5170 - 5250 @ 40), (N/A, 31)
>>>>>>> (5250 - 5330 @ 40), (N/A, 31), DFS
>>>>>>> (5490 - 5600 @ 40), (N/A, 31), DFS
>>>>>>> (5650 - 5710 @ 40), (N/A, 31), DFS
>>>>>>
>>>>>> Here you can see that the channel you want to use is not allowed by the
>>>>>> regulatory code. It seems that you're using "00" as the country
>>>>>> (world). From the regulatory database [1], you can see that channel 196
>>>>>> (4980 MHz) is only allowed in Japan (regulatory country "JP").
>>>>>
>>>>> Forgot to paste the link to the regulatory database:
>>>>>
>>>>> http://git.kernel.org/cgit/linux/kernel/git/linville/wireless-regdb.git/tree/db.txt
>>>>>
>>>>>>
>>>>>>> iw list
>>>>>>>
>>>>>>> Frequencies:
>>>>>>> * 5180 MHz [36] (17.0 dBm)
>>>>>>> * 5200 MHz [40] (21.0 dBm)
>>>>>>> * 5220 MHz [44] (17.0 dBm)
>>>>>>> * 5240 MHz [48] (17.0 dBm)
>>>>>>> * 5260 MHz [52] (17.0 dBm) (radar detection)
>>>>>>> * 5280 MHz [56] (17.0 dBm) (radar detection)
>>>>>>> * 5300 MHz [60] (17.0 dBm) (radar detection)
>>>>>>> * 5320 MHz [64] (17.0 dBm) (radar detection)
>>>>>>> * 5500 MHz [100] (17.0 dBm) (radar detection)
>>>>>>> * 5520 MHz [104] (21.0 dBm) (radar detection)
>>>>>>> * 5540 MHz [108] (21.0 dBm) (radar detection)
>>>>>>> * 5560 MHz [112] (21.0 dBm) (radar detection)
>>>>>>> * 5580 MHz [116] (21.0 dBm) (radar detection)
>>>>>>> * 5600 MHz [120] (disabled)
>>>>>>> * 5620 MHz [124] (disabled)
>>>>>>> * 5640 MHz [128] (disabled)
>>>>>>> * 5660 MHz [132] (17.0 dBm) (radar detection)
>>>>>>> * 5680 MHz [136] (17.0 dBm) (radar detection)
>>>>>>> * 5700 MHz [140] (17.0 dBm) (radar detection)
>>>>>>> * 5745 MHz [149] (21.0 dBm)
>>>>>>> * 5765 MHz [153] (21.0 dBm)
>>>>>>> * 5785 MHz [157] (21.0 dBm)
>>>>>>> * 5805 MHz [161] (21.0 dBm)
>>>>>>> * 5825 MHz [165] (20.0 dBm)
>>>>>>> * 4915 MHz [183] (21.0 dBm)
>>>>>>> * 4920 MHz [184] (21.0 dBm)
>>>>>>> * 4925 MHz [185] (21.0 dBm)
>>>>>>> * 4930 MHz [186] (21.0 dBm)
>>>>>>> * 4935 MHz [187] (21.0 dBm)
>>>>>>> * 4940 MHz [188] (21.0 dBm)
>>>>>>> * 4945 MHz [189] (21.0 dBm)
>>>>>>> * 4960 MHz [192] (21.0 dBm)
>>>>>>> * 4980 MHz [196] (21.0 dBm)
>>>>>>
>>>>>> This shows that the driver supports 4980, but it won't be able to use it
>>>>>> if the regulatory doesn't allow it.
>>>>>>
>>>>>>
>>>>>>> But, could you explain me the reason behing I get this error, I mean,
>>>>>>> what does it mean, for instance problem with the interface, the
>>>>>>> channel isn't supported by the driver ..., I would like to understand
>>>>>>> it, not just resolve it.
>>>>>>
>>>>>> This is because the radio regulations in the country you're choosing
>>>>>> ("world" is a set of frequencies that is valid in *every* country)
>>>>>> doesn't allow WiFi operation on the channel you want to use. You can
>>>>>> only legally use channel 196 in Japan. So, if you are in Japan, you can
>>>>>> do this:
>>>
>>
>> As said earlier, Channel config is not only controlled by hostapd but also
>> cfg80211 and driver.so if you can share the dmesg, then we can see why
>> the driver/cfg80211 has disabled that particular channel even though
>> its supported.
> _______________________________________________
> HostAP mailing list
> HostAP at lists.shmoo.com
> http://lists.shmoo.com/mailman/listinfo/hostap
>
More information about the Hostap
mailing list