[RFC 3/3] wpa_supplicant: Add configuration parameter for 2040coex
Rajkumar Manoharan
rmanohar
Wed Apr 18 06:44:10 PDT 2012
To enable 2040 coexistence report generation for 40MHz intolerance, use
the following option in wpa_supplicant config file.
report_2040coex=1
Signed-off-by: Rajkumar Manoharan <rmanohar at qca.qualcomm.com>
---
wpa_supplicant/config.c | 3 ++-
wpa_supplicant/config.h | 8 ++++++++
wpa_supplicant/config_file.c | 2 ++
wpa_supplicant/wpa_supplicant.c | 3 +++
4 files changed, 15 insertions(+), 1 deletion(-)
diff --git a/wpa_supplicant/config.c b/wpa_supplicant/config.c
index 2a166c7..ff3bf52 100644
--- a/wpa_supplicant/config.c
+++ b/wpa_supplicant/config.c
@@ -2871,7 +2871,8 @@ static const struct global_parse_data global_fields[] = {
{ INT_RANGE(disassoc_low_ack, 0, 1), 0 },
{ INT_RANGE(interworking, 0, 1), 0 },
{ FUNC(hessid), 0 },
- { INT_RANGE(access_network_type, 0, 15), 0 }
+ { INT_RANGE(access_network_type, 0, 15), 0 },
+ { INT(report_2040coex), 0 }
};
#undef FUNC
diff --git a/wpa_supplicant/config.h b/wpa_supplicant/config.h
index 968f14b..bee3b21 100644
--- a/wpa_supplicant/config.h
+++ b/wpa_supplicant/config.h
@@ -602,6 +602,14 @@ struct wpa_config {
* Homogeneous ESS. This is used only if interworking is enabled.
*/
u8 hessid[ETH_ALEN];
+
+ /**
+ * report_2040coex - Generate 2040 coexistence report
+ *
+ * Allow the station to generate 2040 coexistence report if any of
+ * 40 MHz intolerant AP found in the network.
+ */
+ int report_2040coex;
};
diff --git a/wpa_supplicant/config_file.c b/wpa_supplicant/config_file.c
index 671f7d6..ecb41bf 100644
--- a/wpa_supplicant/config_file.c
+++ b/wpa_supplicant/config_file.c
@@ -842,6 +842,8 @@ static void wpa_config_write_global(FILE *f, struct wpa_config *config)
fprintf(f, "access_network_type=%d\n",
config->access_network_type);
#endif /* CONFIG_INTERWORKING */
+ if (config->report_2040coex)
+ fprintf(f, "report_2040coex=%d\n", config->report_2040coex);
}
#endif /* CONFIG_NO_CONFIG_WRITE */
diff --git a/wpa_supplicant/wpa_supplicant.c b/wpa_supplicant/wpa_supplicant.c
index 5d4de3c..25827d5 100644
--- a/wpa_supplicant/wpa_supplicant.c
+++ b/wpa_supplicant/wpa_supplicant.c
@@ -3249,6 +3249,9 @@ void wpa_supplicant_proc_40mhz_intolerant(struct wpa_supplicant *wpa_s)
u8 chan_list[P2P_MAX_CHANNELS], channel;
u8 num_channels = 0, i;
+ if (!wpa_s->conf->report_2040coex)
+ return;
+
if (!wpa_s->current_bss || wpa_s->wpa_state != WPA_COMPLETED)
return;
--
1.7.10
More information about the Hostap
mailing list