EAP-SIM fails

[why]

Hi, all. I use hostapd-0.7.3 and wpa_supplicant-0.6.10 to test eap-sim. But it fails. Here are some results, can someone help me? Thank you!


EAP: using real identity - hexdump_ascii(len=16):
     31 34 36 30 30 32 31 35 30 35 39 31 30 30 36 30   1460021505910060
SCARD: verifying PIN
SCARD: scard_transmit: send - hexdump(len=13): [REMOVED]
SCARD: scard_transmit: recv - hexdump(len=2): 90 00
SCARD: PIN verified successfully
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
TX EAPOL: dst=40:16:9f:16:56:44
TX EAPOL - hexdump(len=25): 01 00 00 15 02 69 00 15 01 31 34 36 30 30 32 31 35 30 35 39 31 30 30 36 30
EAPOL: SUPP_BE entering state RECEIVE
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: 00:00:00:00:00:00
Setting scan request: 0 sec 100000 usec
Added BSSID 40:16:9f:16:56:44 into blacklist
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
wpa_driver_nl80211_set_key: alg=0 addr=0x809d8a8 key_idx=0 set_tx=0 seq_len=0 key_len=0
nl80211: set_key failed; err=-67
wpa_driver_nl80211_set_key: alg=0 addr=0x809d8a8 key_idx=1 set_tx=0 seq_len=0 key_len=0
nl80211: set_key failed; err=-67
wpa_driver_nl80211_set_key: alg=0 addr=0x809d8a8 key_idx=2 set_tx=0 seq_len=0 key_len=0
nl80211: set_key failed; err=-67
wpa_driver_nl80211_set_key: alg=0 addr=0x809d8a8 key_idx=3 set_tx=0 seq_len=0 key_len=0
nl80211: set_key failed; err=-67
wpa_driver_nl80211_set_key: alg=0 addr=0x88c751c key_idx=0 set_tx=0 seq_len=0 key_len=0
   addr=40:16:9f:16:56:44
nl80211: set_key failed; err=-67
State: ASSOCIATED -> DISCONNECTED
wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.shmoo.com/pipermail/hostap/attachments/20111011/4e1be693/attachment.htm