Problem with IAPP

[Jouni Malinen]

On Fri, Sep 30, 2011 at 12:46:54AM +0900, Khamidulla Inoyatov wrote:
> AP has two interface for wired and wireless link, eth0 and
> ath0 respectively. However AP configured as bridge. Madwifi is used as
> wireless network device's driver. Configuration file for hostapd as
> following:

> iapp_interface=eth0

You will need to set this to the interface on which the IP address is
configured, i.e., most likely the bridge interface in this case.

-- 
Jouni Malinen                                            PGP id EFC895FA