ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Function not implemented

[Jouni Malinen]

On Thu, May 26, 2011 at 11:34:57AM -0700, Dennison Williams wrote:
> I am having issues getting a "NetGear, Inc. MA111(v1) 802.11b Wireless
> [Intersil Prism 3.0]" device working with hostap.  I am using the
> prism2_usb driver, firmware: pri=1.1.3, sta=1.8.3 and the hostapd config
> file specified inline below.  When I start hostapd with the command
> `hostapd -dd /etc/hostapd/hostapd.conf` I get the following failure message:
> 
> ctrl_interface_group=0
> ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Function not implemented

prism2_usb driver does not support the hostap driver interface. It is
only used by the Host AP driver.

-- 
Jouni Malinen                                            PGP id EFC895FA