support for lable method in wpa_supplicant-0.7.3 in AP mode???

[vamsi krishna]

Hi,

Thanks for your reply Stone.

0.7.3 also supports WPS pin method. But I am particular about the
lable configuration method.
If it supports lable configuration method also, please let me know how
should I configure wpa_supplicant on AP side with a constant lable
PIN.

Thanks,
Vamsi.

On 12 August 2011 14:03, Stone <stonezju at gmail.com> wrote:
> hi vamsi krishna,
> Do you mean WPS pin method with wpa_supplicant working as AP? I am not very
> sure about 0.7.3, while wpa_supplicant 0.8.x latest code supports this. If
> you want to use wpa_supplicant working as AP, you?can use cmd in wpa_cli
> "set_network 0 mode 2" to enable AP mode. You can refer to README-WPS about
> WPS pin method usage.
>
> 2011/8/12 vamsi krishna <vamsi531 at gmail.com>
>>
>> Hi All,
>>
>> Please let me know whether wpa_supplicant-0.7.3 has support for WPS
>> lable method in AP mode.
>>
>> If it supports, let me know how to enable it and use it. Please point
>> me if there is any document available on WPS lable method usage.
>>
>> Thanks in advance,
>> - Vamsi.
>> _______________________________________________
>> HostAP mailing list
>> HostAP at lists.shmoo.com
>> http://lists.shmoo.com/mailman/listinfo/hostap
>
>