Configuring hwsim0 using hostapd
uday kiran
kaniki.uday
Fri Aug 12 04:19:45 PDT 2011
Hi
I have a config file as below.
interface=hwsim0
driver=madwifi
ssid=madwifi test
i have installed hostapd0.7.3 and madwifi 0.9.4
When I run the conf with hostapd (./hostapd simple_test.conf), I got the
following error.
====== Configuration file: ../hostapd-0.7.3/hostapd/host.conf
====== ioctl[SIOCSIWMODE]: Operation not supported
====== Could not set interface to master mode!
====== madwifi driver initialization failed.
Could some one help me out , in resolving this issue ?
Please refer attachment for additional info.
Thanks in advance.
-Uday
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.shmoo.com/pipermail/hostap/attachments/20110812/d371045f/attachment.htm
-------------- next part --------------
Additional info:
===========
OS : fedora 2.6.33
hwsim0 Link encap:UNSPEC HWaddr 12-00-00-00-00-00-A1-A2-00-00-00-00-00-00-00-00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
lsmod output
==========
Module Size Used by
xfrm4_tunnel 1359 0
tunnel4 1887 1 xfrm4_tunnel
ipcomp 1435 0
xfrm_ipcomp 3134 1 ipcomp
esp4 3960 0
ah4 3777 0
af_key 22493 0
ath 6974 0
arc4 1041 4
ecb 1491 4
mac80211_hwsim 9667 0
mac80211 163458 1 mac80211_hwsim
cfg80211 97351 3 ath,mac80211_hwsim,mac80211
rfkill 12905 1 cfg80211
ath_pci 138358 0
wlan 177898 1 ath_pci
ath_hal 350382 1 ath_pci
fuse 46663 2
ip6table_filter 2191 1
ip6_tables 9211 1 ip6table_filter
xt_physdev 1363 1
bridge 37420 0
stp 1367 1 bridge
llc 3545 2 bridge,stp
sunrpc 159624 1
p4_clockmod 2943 0
More information about the Hostap
mailing list