Can't boot hostapd with ath9k driver

Masashi Honma honma
Mon Jun 22 00:53:15 PDT 2009


Hello.

I'm using latest hostapd which commited on "Thu, 11 Jun 2009 20:47:35 +0000".
But I can't boot hostapd.
The hostapd failed to change state of card to AP mode.

My environment is:
kernel : linux-2.6.30
compat wireless : compat-wireless-2.6.30.tar.bz2
regulatory database : wireless-regdb-2009.04.17.tar.bz2
CRDA : crda-1.1.0
hardware : WL300NC-G (AR9223/CB91 2x2 SB)

I enabled
CONFIG_MAC80211_DEFAULT_PS=n
CONFIG_MAC80211_DEFAULT_PS_VALUE=1
on compat-wireless.

---- hostapd log start ----
Configuration file: examples/eap.conf
ctrl_interface_group=0
TLS: Trusted root certificate(s) loaded
nl80211: Add own interface ifindex 5
nl80211: Add own interface ifindex 4
nl80211: Failed to set interface 4 to mode 3: -16 (Device or resource busy)
nl80211: Failed to set interface wlan1 into AP mode
nl80211 driver initialization failed.
wlan1: Unable to setup interface.
Flushing old station entries
Deauthenticate all stations
rmdir[ctrl_interface]: No such file or directory
ELOOP: remaining socket: sock=3 eloop_data=0x9f01da0 user_data=0x9ef78c8 handler=0x8077ae0
---- hostapd log end   ----

---- CRDA log start ----
[    6.785924] cfg80211: Calling CRDA to update world regulatory domain
[    8.472035] cfg80211: Calling CRDA for country: JP
---- CRDA log end   ----

---- aht9k log start ----
[    6.878802] ath9k 0000:03:00.0: enabling device (0000 -> 0002)
[    6.878814] ath9k 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    8.471422] phy0: Selected rate control algorithm 'ath9k_rate_control'
[    8.471724] Registered led device: ath9k-phy0::radio
[    8.471744] Registered led device: ath9k-phy0::assoc
[    8.471765] Registered led device: ath9k-phy0::tx
[    8.471784] Registered led device: ath9k-phy0::rx
[  196.838886] ath9k: received PCI FATAL interrupt
---- aht9k log end   ----

And I attahced hostapd.conf.

Is there any idea ?

Regards,
Masashi Honma.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: eap.zip
Type: application/zip
Size: 15115 bytes
Desc: not available
Url : http://lists.shmoo.com/pipermail/hostap/attachments/20090622/58dca6ec/attachment.zip 



More information about the Hostap mailing list