hostapd LEAP support

Paresh Sawant paresh.sawant
Tue Sep 9 06:25:01 PDT 2008


i have shortened the log messages to meet the moderations requirements ---

/*****************************************************************************************************************/

ath0: RADIUS Received 99 bytes from RADIUS server
ath0: RADIUS Received RADIUS message
RADIUS message: code=11 (Access-Challenge) identifier=1 length=99
   Attribute 69 (?Unknown?) length=37
   Attribute 79 (EAP-Message) length=6
      Value: 03 03 00 04
   Attribute 80 (Message-Authenticator) length=18
      Value: c8 06 fe 18 b5 18 ce 05 40 55 cd 0f 6c cc c7 62
   Attribute 24 (State) length=18
      Value: 0e 6b ec 8e 4b f5 65 34 8e 8d f1 e3 e8 81 c5 ff
ath0: STA 00:13:02:0c:fc:29 RADIUS: Received RADIUS packet matched with a
pending request, round trip time 0.00 sec
RADIUS packet matching with station 00:13:02:0c:fc:29
ath0: STA 00:13:02:0c:fc:29 IEEE 802.1X: using EAP timeout of 30 seconds
ath0: STA 00:13:02:0c:fc:29 IEEE 802.1X: decapsulated EAP packet (code=3
id=3 len=4) from RADIUS server: EAP Success
IEEE 802.1X: 00:13:02:0c:fc:29 BE_AUTH entering state REQUEST
IEEE 802.1X: Sending EAP Packet to 00:13:02:0c:fc:29 (identifier 3)
TX EAPOL - hexdump(len=22): 00 13 02 0c fc 29 00 18 4d ed 65 db 88 8e 02 00
00 04 03 03 00 04
IEEE 802.1X: 00:13:02:0c:fc:29 REAUTH_TIMER entering state INITIALIZE
IEEE 802.1X: 00:13:02:0c:fc:29 REAUTH_TIMER entering state INITIALIZE
IEEE 802.1X: 20 bytes from 00:13:02:0c:fc:29
   IEEE 802.1X: version=2 type=0 length=16
   EAP: code=1 identifier=3 length=16 (request)
IEEE 802.1X: 00:13:02:0c:fc:29 REAUTH_TIMER entering state INITIALIZE
IEEE 802.1X: 00:13:02:0c:fc:29 - aWhile --> 0
IEEE 802.1X: 00:13:02:0c:fc:29 REAUTH_TIMER entering state INITIALIZE
ath0: STA 00:13:02:0c:fc:29 IEEE 802.1X: EAP timeout
IEEE 802.1X: 00:13:02:0c:fc:29 BE_AUTH entering state TIMEOUT
IEEE 802.1X: 00:13:02:0c:fc:29 REAUTH_TIMER entering state INITIALIZE
IEEE 802.1X: 00:13:02:0c:fc:29 AUTH_PAE entering state ABORTING
IEEE 802.1X: 00:13:02:0c:fc:29 BE_AUTH entering state INITIALIZE
ath0: STA 00:13:02:0c:fc:29 IEEE 802.1X: aborting authentication
IEEE 802.1X: 00:13:02:0c:fc:29 REAUTH_TIMER entering state INITIALIZE
IEEE 802.1X: 00:13:02:0c:fc:29 AUTH_PAE entering state RESTART
IEEE 802.1X: station 00:13:02:0c:fc:29 - new auth session, clearing State


/*****************************************************************************************************************/

- Paresh

On Tue, Sep 9, 2008 at 5:45 PM, Kiran Kulkarni <kiran.1267 at gmail.com> wrote:

> Can you send some log messages as it will help everybody to understand the
> actual problem
>
> Paresh Sawant wrote:
>
>> Hi,
>>
>> I'm trying to do WPA2 enterprise association using EAP-LEAP with hostapd.
>> Hostapd is using madwifi driver on Linux.
>>
>> I notice that the hostapd discards the EAP-request(containing challenge)
>> from supplicant (WLAN client), leading to not accomplishing EAP-LEAP
>> authentication.
>>
>> It seems since EAP authenticator state machine does NOT accept the
>> EAP-Request Packet, it discards it.
>>
>> Is there a way or patch to perform EAP-LEAP authentication with hostapd?
>>
>> Thanks
>> - Paresh
>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> HostAP mailing list
>> HostAP at lists.shmoo.com
>> http://lists.shmoo.com/mailman/listinfo/hostap
>>
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.shmoo.com/pipermail/hostap/attachments/20080909/3a8891c9/attachment.htm 



More information about the Hostap mailing list