Problem on using the binary for windows

Jack Yip Jack
Thu Mar 27 14:22:06 PDT 2008


 
Hi,
I was succesfully using the windows binary to connect to a AP working in PSK mode.
But I want to test the windows binary if it works with EAP-FAST to CISCO server.
Do I need to install anything else?
As from the debug msg of the Cisco Server,
*Mar  3 05:15:49.629: RADSRV EAP-FAST: Add teap client 0013.0224.b8c9      
*Mar  3 05:15:49.629: RADSRV EAP-FAST:  Sending TEAP start                 
*Mar  3 05:15:49.672: RADSRV EAP-FAST:  EAP NAK received, reject the client
*Mar  3 05:15:49.672: RADSRV EAP-FAST: Delete teap client 0013.0224.b8c9   
It seems it is not even start.

And from the debug msg of the wpa_supplicat.exe, 
 
****************************************************************************
EAP: EAP entering state RECEIVED                                                
EAP: Received EAP-Request id=1 method=1 vendor=0 vendorMethod=0                 
EAP: EAP entering state IDENTITY                                                
CTRL-EVENT-EAP-STARTED EAP authentication started                               
CTRL_IFACE monitor send 01507908                                                
EAP: EAP-Request Identity data - hexdump_ascii(len=39):                         
     00 6e 65 74 77 6f 72 6b 69 64 3d 41 50 31 31 33   _networkid=AP113         
     30 2c 6e 61 73 69 64 3d 41 50 31 31 33 30 2c 70   0,nasid=AP1130,p         
     6f 72 74 69 64 3d 30                              ortid=0                  
EAP: using anonymous identity - hexdump_ascii(len=9):                           
     61 6e 6f 6e 79 6d 6f 75 73                        anonymous                
EAP: EAP entering state SEND_RESPONSE                                           
EAP: EAP entering state IDLE                                                    
EAPOL: SUPP_BE entering state RESPONSE                                          
EAPOL: txSuppRsp                                                                
TX EAPOL: dst=00:1f:6c:aa:a9:60                                                 
EAPOL: SUPP_BE entering state RECEIVE                                           
RX EAPOL from 00:1f:6c:aa:a9:60                                                 
EAPOL: Received EAP-Packet frame                                                
EAPOL: SUPP_BE entering state REQUEST                                           
EAPOL: getSuppRsp                                                               
EAP: EAP entering state RECEIVED                                                
EAP: Received EAP-Request id=2 method=43 vendor=0 vendorMethod=0                
EAP: EAP entering state GET_METHOD                                              
EAP: Initialize selected EAP method: vendor 0 method 43 (FAST)                  
EAP-FAST: Automatic PAC provisioning mode: 0                                    
TLS: Phase2 EAP types - hexdump(len=88): 00 00 00 00 04 00 00 00 00 00 00 00 1a 
00 00 00 00 00 00 00 06 00 00 00 00 00 00 00 05 00 00 00 00 00 00 00 12 00 00 00
 00 00 00 00 11 00 00 00 00 00 00 00 2f 00 00 00 00 00 00 00 17 00 00 00 00 00 0
0 00 2e 00 00 00 00 00 00 00 30 00 00 00 00 00 00 00 26 00 00 00                
OpenSSL: tls_connection_ca_cert - Failed to load root certificates error:0200100
3:system library:fopen:No such process                                          
OpenSSL: pending error: error:2006D080:BIO routines:BIO_new_file:no such file   
OpenSSL: pending error: error:0B084002:x509 certificate routines:X509_load_cert_
crl_file:system lib                                                             
OpenSSL: tls_load_ca_der - Failed load CA in DER format error:02001003:system li
brary:fopen:No such process                                                     
OpenSSL: pending error: error:20074002:BIO routines:FILE_CTRL:system lib        
OpenSSL: pending error: error:0B06F002:x509 certificate routines:X509_load_cert_
file:system lib                                                                 
TLS: Failed to set TLS connection parameters                                    
EAP-FAST: Failed to initialize SSL.                                             
EAP: Failed to initialize EAP method: vendor 0 method 43 (FAST)                 
CTRL_IFACE monitor send 01507908                                                


**********************************************************************
Do I miss any procedure?
Please advise!!!
Jack                          _______________________________________________
HostAP mailing list
HostAP at lists.shmoo.com
http://lists.shmoo.com/mailman/listinfo/hostap

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.shmoo.com/pipermail/hostap/attachments/20080328/063f9a99/attachment-0001.htm 



More information about the Hostap mailing list