WPA - AP association Issue
Mr. Maloomnahi
maloomnahi
Wed Oct 31 06:05:43 PDT 2007
Hi Bryan,
All the APs have different SSID. I have give the specific TLS CCMP CONF file path in .config. I have annexed the CONF file for your perusal.
I have activated the PKCS engine at /usr/lib/pkcs11/libcoolkeypk11.so with engine = 1. Is that required for TLS CCMP association?
I am currently trying the settings at WPA
=============
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
eapol_version=1
ap_scan=2
fast_reauth=1
pkcs11_engine_path=/usr/lib/libcoolkeypk11.so
network={
ssid="SEMCO_AP"
proto=WPA
pairwise=CCMP
auth_alg=OPEN
key_mgmt=WPA-EAP
group=CCMP
engine=1
mode=0
eap=tls
ca_cert="/usr/bin/CA/ca-cert.pem"
client_cert="/usr/bin/CA/ca-cert.pem"
private_key="/usr/bin/CA/private/ca-key.pem"
}
=============
AP Settings are as follows - Scanned Information
=============
[root at chandrasekhar wpa_supplicant-0.5.8]# iwlist ath0 scanning
ath0 Scan completed :
Cell 01 - Address: 00:14:78:8F:5E:49
ESSID:"SEMCO_AP"
Mode:Master
Frequency:2.412 GHz (Channel 1)
Quality=47/94 Signal level=-48 dBm Noise level=-95 dBm
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Extra:bcn_int=100
IE: WPA Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : 802.1X
Extra:wme_ie=dd180050f2020101840002a3400027a4000042435e0062322f00
Extra:ath_ie=dd0900037f01010024ff7f
=============
Still the issue is the same. Now especially after the .config change, association has become difficult. I have rteid many combinations of the CONF file settings.
Looking forward to your inputs
Thanks
PPN
--
My life has changed. What about yours?
Log on to the new Indiatimes Mail and Live out of the Inbox!
More information about the Hostap
mailing list