WPA - AP association Issue

[Mr. Maloomnahi]

Hi Dan,

Thanks for the informations provided. 

The SSID specified is "SEMCO_AP" and in the previous posts I have mentioned the SSID, CONF file setting details and the chipsets used (along with testing details).

iwlist ath0 scan is scanning all the APs in the network with the details
=============== EXAMPLE
[root at localhost wpa_supplicant-0.5.8]# iwlist ath0 scanning
ath0      Scan completed :
          Cell 01 - Address: 00:14:78:8F:5E:49
                    ESSID:"SEMCO_AP"
                    Mode:Master
                    Frequency:2.412 GHz (Channel 1)
                    Quality=7/94  Signal level=-88 dBm  Noise level=-95 dBm
                    Encryption key:on
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
                              9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
                              48 Mb/s; 54 Mb/s
                    Extra:bcn_int=100
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) :TKIP
                        Authentication Suites (1) : PSK
                    Extra:wme_ie=dd180050f20201018f0002a3400027a4000042435e0062322f00
                    Extra:ath_ie=dd0900037f01010024ff7f
===============

The pairwise settings, group, keys and the authentication suite specified in the WPA CONF file is the same and no difference. I have copied the settings in my previous post.

==============
 network={
 	ssid="SEMCO_AP"
                psk="DEAD-BEEF-AA"
 	priority=2
	auth_alg=OPEN
                group=TKIP
                pairwise=TKIP
 }
==============

Thanks 
PPN

--
My life has changed. What about yours?
Log on to the new Indiatimes Mail and Live out of the Inbox!