wired 802.1X authorization for Asus wl500gx router

[Mikhail Kostousov]

I've compiled tcpdump for router, but I cannot find information how to
define ethertype :( Can you help me a bit?
I have also tried tcpdump on desktop, and it is visible that there is EAP
packets. But, router is in the same net and connected to net via usual hub.
I am not sure, must router's tcpdump also show EAP frames or not?

On 2/15/07, Jouni Malinen <jkmaline at cc.hut.fi> wrote:
>
> On Wed, Feb 14, 2007 at 01:12:28PM +0100, Mikhail Kostousov wrote:
>
> > eth0 is ethernet adapter on my laptop (which connects with this
> > configuration perfectly),
> > vlan1 is VAN interface of my router (it is wired interface).
>
> It looks like wpa_supplicant does not receive any of the EAPOL frames
> from vlan1. Could you run a sniffer (tcpdump/tethereal/etc.) on the
> router and verify whether you actually see any of the EAPOL frames that
> way (ethertype==0x888e)? Which Ethernet driver (and/or Ethernet adapter
> hw) is used in that device?
>
> --
> Jouni Malinen                                            PGP id EFC895FA
> _______________________________________________
> HostAP mailing list
> HostAP at shmoo.com
> http://lists.shmoo.com/mailman/listinfo/hostap
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.shmoo.com/pipermail/hostap/attachments/20070217/49b5ddf7/attachment.htm