802.11g pcmcia wireless card?
Wed Jun 21 19:04:54 PDT 2006
The cards I used (MiniPCI, not PCMCIA) for my embedded solutions are:
1. Prism2.5-based card (e.g. Senao 2511MP Plus) - hostap driver
2. PrismGT (e.g. RM2) - prism54 driver (hardmac)
3. Atheros (e.g. CM9 or Senao NMP-8602 Plus ) - madwifi-ng driver
All works great under master mode in my voyage linux box.
hostap and prism54 are natively supported in the recent 2.6 kernels.
For Atheros, you will need to patch the kernel with madwifi-ng driver
or compile as external module.
There are some more cards that support Master mode (i.e. AP), but it
needs the kernel patches or uses a special kernel tree (the dscape
stack) and it is not very straightforward.
On 6/21/06, richard <yczhao at hhcn.com> wrote:
> Then any cards supported under linux, I want to configure it as AP
> ======= 2006-06-21 11:59:06 ????????=======
> >On Wed, 2006-06-21 at 10:32 +0800, richard wrote:
> >> hi all,
> >> would you please recommend some type of 802.11g pcmcia wireless cards that hostap supported?
> >> thanks.
> >There is no such card. Supported cards use Prism 2/2.5/3 chipsets that
> >only support 802.11b.
> >Pavel Roskin
> = = = = = = = = = = = = = = = = = = = =
> Best Regards,
> Richard Zhao ???
> Product Manager
> TEL : +86-551-5333156, 5333157-803
> FAX : +86-551-5325323
> Mail : yczhao at hhcn.com
> WEB : http://www.hhcn.com
> HHTech : An Embedded Linux Tech. Provider in Mainland China
> HostAP mailing list
> HostAP at shmoo.com
P U N K N ! X . c o m
Technology + Lifestyle
V O Y A G E . H K - http://www.voyage.hk
Linux - voyage-0.2 is released!
Store - Senao NMP-8602 Plus (400mW) is now in stock!
More information about the Hostap