wpa_supplicant: problems with EAP-SIM

[Pete Young]

Hi Jouni,

Many thanks for the prompt reply.

Jouni Malinen wrote:

> ssid must not be configured for wired 802.1X authentication. This line
> prevents wpa_supplicant from entering "ASSOCIATED" state and makes it
> ignored received EAPOL frames.

OK, I've removed the ssid setting from the config file, and I'm now
seen the state machine go into the ASSOCIATED state as you describe.

I'm still not seeing any APDUs being passed to or from the SIM card,
and the debug trace now says:

RX EAPOL from 00:13:1a:c0:5c:01
RX EAPOL - hexdump(len=46): 01 00 00 05 01 00 00 05 01 00 00 00 00 00 00 
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00
00 00
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_PAE entering state RESTART
EAP: EAP entering state INITIALIZE
EAP: EAP entering state IDLE
EAPOL: SUPP_PAE entering state AUTHENTICATING
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request method=1 id=0
EAP: EAP entering state IDENTITY
CTRL-EVENT-EAP-STARTED EAP authentication started
EAP: EAP-Request Identity data - hexdump_ascii(len=0):
EAP: using real identity - hexdump_ascii(len=0):
EAP: buildIdentity: identity configuration was not available
PIN validation failed
CTRL-REQ-PIN-0:PIN needed for SSID
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE

Kind regards,

Pete

-- 
   ____________________________________________________________________
   Pete Young          pete.young at bt.com          Phone +44 1473 642740
       "Just another crouton, floating on the bouillabaisse of life"