hostapd with Atheros

[Michael Plourde]

 Hi,
i have try to compile hostapd for use with my Atheros card. My .config file
looks like:
---------------------------------------------------------------------------
# Driver interface for Host AP driver
CONFIG_DRIVER_HOSTAP=y

# Driver interface for wired authenticator
#CONFIG_DRIVER_WIRED=y

# Driver interface for madwifi driver
CONFIG_DRIVER_MADWIFI=y
CFLAGS += -I/home/mplourde/Developpement/madwifi-ng-r1352-20051211
# change to reflect local setup; directory for madwifi src

# Driver interface for Prism54 driver
#CONFIG_DRIVER_PRISM54=y

# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
#CONFIG_DRIVER_BSD=y
CFLAGS += -I/usr/local/wrap-board/include
LIBS += -L/usr/local/wrap-board/usr/lib

# IEEE 802.11F/IAPP
CONFIG_IAPP=y


# WPA2/IEEE 802.11i RSN pre-authentication
CONFIG_RSN_PREAUTH=y

# Integrated EAP server
CONFIG_EAP=y

# EAP-MD5 for the integrated EAP server
CONFIG_EAP_MD5=y

# EAP-TLS for the integrated EAP server
CONFIG_EAP_TLS=y

# EAP-MSCHAPv2 for the integrated EAP server
CONFIG_EAP_MSCHAPV2=y

# EAP-PEAP for the integrated EAP server
CONFIG_EAP_PEAP=y

# EAP-GTC for the integrated EAP server
CONFIG_EAP_GTC=y

# EAP-TTLS for the integrated EAP server
CONFIG_EAP_TTLS=y

# EAP-SIM for the integrated EAP server
#CONFIG_EAP_SIM=y

# EAP-PAX for the integrated EAP server
#CONFIG_EAP_PAX=y

# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
#CONFIG_EAP_PSK=y

# PKCS#12 (PFX) support (used to read private key and certificate file from
# a file that usually has extension .p12 or .pfx)
CONFIG_PKCS12=y

# RADIUS authentication server. This provides access to the integrated EAP
# server from external hosts using RADIUS.
#CONFIG_RADIUS_SERVER=y

# Build IPv6 support for RADIUS operations
CONFIG_IPV6=y

----------------------------------------------------------------------------
----

i had no problem with compilation, but when trying to run hostapd :
----------------------------------------------------------------------------
----
 hostapd -dd /etc/hostapd/hostapd.conf
Configuration file: /etc/hostapd/hostapd.conf
ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Operation not supported
Could not enable hostapd mode for interface ath0
hostap driver initialization failed.
----------------------------------------------------------------------------
----
What is wrong ?

Thank you,
Michael Plourde