ioctl[PRISM2_IOCTL_HOSTAPD]: Connection timed out - Could not communicate with the kernel driver.

[Alec Waters]

Hi Jouni,

Many thanks for the reply.

> Could
> you please send out dmesg output after running the first command (e.g.,
> hostap_diag wlan0) with the card? C

wifi0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wifi0: hfa384x_cmd_issue - timeout - reg=0x8021
wifi0: hfa384x_cmd: entry still in list? (entry=c3dd1ce8, type=0, res=-1)
wifi0: hfa384x_cmd: interrupted; err=-110
wifi0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd0b, len=1008)

> Could you also please check whether
> any interrupts are being received? I would hope that the allocated irq
> 49 is not shared with other devices, so the number of interrupts would
> be easily available from /proc/interrupts.

# cat /proc/interrupts
            CPU0
   0:        120   HWUART
  15:        824   FFUART
  18:          0   DMA
  19:      17166   PXA Timer Tick
  27:          0   CF0 nSTSCHG
  34:          0   CF0 nCD
  49:         27   pcmcia0.0
  59:          0   eth0
Err:          0

many thanks,
alec
-- 
Alec Waters CCNP
Dataline Software Ltd
Clarence House, 30-31 North Street, Brighton, BN1 1EB, UK

Tel: +44 (0)1273 324939
Fax: +44 (0)1273 205576
www: http://www.dataline.co.uk
IPv6: http://www.ipv6.dataline.co.uk