Connection to DI-624 fails

[Jochen Antesberger]

I forgot to include my config file. Also it would be nice to hear if
anyone was successfully connecting to a DI-624, possibly even with a
3com card.

Here the config:
-----
# allow frontend (e.g., wpa_cli) to be used by all users in 'wheel'
group
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
#
# home network; allow all valid ciphers
network={
        ssid="ROUTER-ID"
        scan_ssid=1
        key_mgmt=WPA-PSK
        psk="test0815"
        }
-----

> Hi,
> 
> I have a 3com Office Connect PC card (3CRSHW196, the one with the
> retractable antenna). I'm trying to connect to a DLink router (DI-624)
> using WPA-PSK but it won't work. I use the atmel driver from
> sourceforge, the latest wpa enabled firmware and the supplicant from
> debian testing. Kernel is 2.6.8 from debian. I've attached the the
> output that I am getting.
> 
> If there is any additional information that you need please tell me so. 

-- 
Jochen Antesberger
jochen at antesberger.org    ----    ja3k5 at mizzou.edu