Wpa_supplicant in WEP mode

[Manoj Kundwani, Noida]

Hi List,
I am using wpa supplicant  in WEP mode .

The  configuration file in /etc/wpa_supplicant file is

Network
{
ssid="myDemo" 
Key_mgmt=NONE
Wep_key0="abcde12345"
Wep_tx_keyidx=0
}



Now when I am running wpa_supplicant ,then I get these messages....


Scan result translation succeeded (length=0)
Scan result translation succeeded (length=0)
Scan result translation succeeded (length=0)
Scan result translation succeeded (length=0)

prism2: wlan0: operating mode changed 3 -> 2
wifi0: LinkStatus=2 (Disconnected)

wifi0: LinkStatus: BSSID=44:44:44:44:44:44

wlan0: Trying to join BSSID 00:0f:34:89:29:ad
wifi0: LinkStatus=6 (Association failed)
wifi0: LinkStatus: BSSID=44:44:44:44:44:44
wlan0: updating basic rate set automatically to match with the new supported
rate set
wifi0: LinkStatus=2 (Disconnected)
wifi0: LinkStatus: BSSID=44:44:44:44:44:44
wifi0: 
wifi0: LinkStatus: BSSID=44:44:44:44:44:44
wlan0: Trying to join BSSID 00:0f:34:89:29:8d
wifi0: LinkStatus=6 (Association failed)
wifi0: LinkStatus: BSSID=44:44:44:44:44:44




Can plz anyone give some pointers on it.
And also what changes should I make in /etc/pcmcia/wireless.opts

Thanks & Best Regards ,
manoj



Disclaimer: 

This message and any attachment(s) contained here are information that is
confidential,proprietary to HCL Technologies and its customers, privileged
or otherwise protected by law.The information is solely intended for the
individual or the entity it is addressed to. If you are not the intended
recipient of this message, you are not authorized to read, forward,
print,retain, copy or disseminate this message or any part of it. If you
have received this e-mail in error, please notify the sender immediately by
return e-mail and delete it from your computer.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.shmoo.com/pipermail/hostap/attachments/20050316/28f1729b/attachment.htm