Something to add to hostap_cs.conf (2nd attempt) oops...

[Jay Strauss]

In order to use hostap, do you need a file called hostap_cs.conf?  If so 
where does it go?

Jay

mrcool at stupidgamerz.com wrote:
> Hello
> 
> I found that the following card [NL-2511EXT2+Mercury]
> (http://www.wisp-router.com/product_info.php?products_id=335) did not
> initialize properly when inserted, as the 200Mw version does... the following
> added to hostap_cs.conf makes it work:
> 
> card "Prism25"
>    version "WLAN", "11Mbps_PC-Card_3.0", "ISL37100P", "Eval-RevA"
>    manfid 0x000b, 0x7100
>    bind "hostap_cs"
> 
> The "Prism25" after the card entry I made up, so I think you could use
> whatever there, but I know this works, I have done it twice.
> 
> Good luck, 
> 
> Jerryf
> _______________________________________________
> HostAP mailing list
> HostAP at shmoo.com
> http://lists.shmoo.com/mailman/listinfo/hostap
> 
> 
>