wpa_supplicant is malfunctioning

Brian Domenick brian
Sun Dec 4 18:46:48 PST 2005


Hi,
    Does anyone know what is going on here. I am running the latest
madwifi-ng, and the latest WPA Supplicant available through CVS and
Subversion. Basically my wireless client functions with WPA PSK for a
random amount of time, sometimes minutes and sometimes hours then the
Supplicant seems to blacklist the access point and I have to restart the
Supplicant and Dhcpclient. I have had this problem with
wpa_supplicant0.4.7 as well. Below is the log from where it breaks after
the last successful group handshake. Is this a configuration problem or
a WPA Supplicant problem ? Any input would be appreciated.

Thanks,

Brian

> WPA: Group rekeying completed with 00:11:21:8a:19:70 [GTK=TKIP]
> State: GROUP_HANDSHAKE -> COMPLETED
> Wireless event: cmd=0x8b19 len=8
> Received 277 bytes of scan results (2 BSSes)
> Scan results: 2
> Wireless event: cmd=0x8b15 len=20
> Wireless event: new AP: 00:00:00:00:00:00
> Setting scan request: 0 sec 100000 usec
> Added BSSID 00:11:21:8a:19:70 into blacklist
> State: COMPLETED -> DISCONNECTED
> EAPOL: External notification - portEnabled=0
> EAPOL: SUPP_PAE entering state DISCONNECTED
> EAPOL: SUPP_BE entering state INITIALIZE
> EAPOL: External notification - portValid=0
> EAPOL: External notification - EAP success=0
> CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> wpa_driver_madwifi_del_key: keyidx=0
> wpa_driver_madwifi_del_key: keyidx=1
> wpa_driver_madwifi_del_key: keyidx=2
> wpa_driver_madwifi_del_key: keyidx=3
> wpa_driver_madwifi_del_key: keyidx=0
> RTM_NEWLINK, IFLA_IFNAME: Interface 'ath0' added
> State: DISCONNECTED -> SCANNING
> Trying to associate with SSID 'home'
> Cancelling scan request
> WPA: clearing own WPA/RSN IE
> Automatic auth_alg selection: 0x1
> WPA: No WPA/RSN IE available from association info
> WPA: Set cipher suites based on configuration
> WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
> WPA: clearing AP WPA IE
> WPA: clearing AP RSN IE
> WPA: using GTK TKIP
> WPA: using PTK TKIP
> WPA: using KEY_MGMT WPA-PSK
> WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00
> 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
> No keys have been configured - skip key clearing
> wpa_driver_madwifi_set_drop_unencrypted: enabled=1
> State: SCANNING -> ASSOCIATING
> wpa_driver_madwifi_associate
> Setting authentication timeout: 60 sec 0 usec
> EAPOL: External notification - EAP success=0
> EAPOL: External notification - EAP fail=0
> EAPOL: External notification - portControl=Auto
> Wireless event: cmd=0x8b1a len=13
> Authentication with 00:00:00:00:00:00 timed out.
> Added BSSID 00:00:00:00:00:00 into blacklist
> State: ASSOCIATING -> DISCONNECTED
> No keys have been configured - skip key clearing
> EAPOL: External notification - portEnabled=0
> EAPOL: External notification - portValid=0
> Setting scan request: 0 sec 0 usec
> State: DISCONNECTED -> SCANNING
> Trying to associate with SSID 'home'
> Cancelling scan request
> WPA: clearing own WPA/RSN IE
> Automatic auth_alg selection: 0x1
> WPA: No WPA/RSN IE available from association info
> WPA: Set cipher suites based on configuration
> WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
> WPA: clearing AP WPA IE
> WPA: clearing AP RSN IE
> WPA: using GTK TKIP
> WPA: using PTK TKIP
> WPA: using KEY_MGMT WPA-PSK
> WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00
> 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
> No keys have been configured - skip key clearing
> wpa_driver_madwifi_set_drop_unencrypted: enabled=1
> State: SCANNING -> ASSOCIATING
> wpa_driver_madwifi_associate
> Setting authentication timeout: 60 sec 0 usec
> EAPOL: External notification - EAP success=0
> EAPOL: External notification - EAP fail=0
> EAPOL: External notification - portControl=Auto
> Wireless event: cmd=0x8b1a len=13
> Authentication with 00:00:00:00:00:00 timed out.
> BSSID 00:00:00:00:00:00 blacklist count incremented to 2
> State: ASSOCIATING -> DISCONNECTED
> No keys have been configured - skip key clearing
> EAPOL: External notification - portEnabled=0
> EAPOL: External notification - portValid=0
> Setting scan request: 0 sec 0 usec
> State: DISCONNECTED -> SCANNING
> Trying to associate with SSID 'home'
> Cancelling scan request
> WPA: clearing own WPA/RSN IE
> Automatic auth_alg selection: 0x1
> WPA: No WPA/RSN IE available from association info
> WPA: Set cipher suites based on configuration
> WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
> WPA: clearing AP WPA IE
> WPA: clearing AP RSN IE
> WPA: using GTK TKIP
> WPA: using PTK TKIP
> WPA: using KEY_MGMT WPA-PSK
> WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00
> 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
> No keys have been configured - skip key clearing
> wpa_driver_madwifi_set_drop_unencrypted: enabled=1
> State: SCANNING -> ASSOCIATING
> wpa_driver_madwifi_associate
> Setting authentication timeout: 60 sec 0 usec
> EAPOL: External notification - EAP success=0
> EAPOL: External notification - EAP fail=0
> EAPOL: External notification - portControl=Auto
> Wireless event: cmd=0x8b1a len=13
> Authentication with 00:00:00:00:00:00 timed out.
> BSSID 00:00:00:00:00:00 blacklist count incremented to 3
> State: ASSOCIATING -> DISCONNECTED
> No keys have been configured - skip key clearing
> EAPOL: External notification - portEnabled=0
> EAPOL: External notification - portValid=0
> Setting scan request: 0 sec 0 usec
> State: DISCONNECTED -> SCANNING
> Trying to associate with SSID 'home'
> Cancelling scan request
> WPA: clearing own WPA/RSN IE
> Automatic auth_alg selection: 0x1
> WPA: No WPA/RSN IE available from association info
> WPA: Set cipher suites based on configuration
> WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
> WPA: clearing AP WPA IE
> WPA: clearing AP RSN IE
> WPA: using GTK TKIP
> WPA: using PTK TKIP
> WPA: using KEY_MGMT WPA-PSK
> WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00
> 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
> No keys have been configured - skip key clearing
> wpa_driver_madwifi_set_drop_unencrypted: enabled=1
> State: SCANNING -> ASSOCIATING

-- 
-----------------------------------------------------------
Brian Domenick
University Director - Information Systems and Technology
Fairleigh Dickinson University
1000 River Road
M/S: T-BH1-01
Teaneck NJ 07666
201-692-2414
brian at fdu.edu
------------------------------------------------------------ 

-------------- next part --------------
A non-text attachment was scrubbed...
Name: brian.vcf
Type: text/x-vcard
Size: 303 bytes
Desc: not available
Url : http://lists.shmoo.com/pipermail/hostap/attachments/20051204/16ad3ef8/attachment.vcf 



More information about the Hostap mailing list