AW: Problems with ALLNET PCI Card

[ARCEO Daniel Beuchler]

Might be a firmware problem ?

Host AP driver diagnostics information for 'wlan0'
NICID: id=0x8013 v1.0.0 (PRISM II (2.5) Mini-PCI (SST parallel flash))
PRIID: id=0x0015 v1.0.5
STAID: id=0x001f v1.3.4 (station firmware)



-----Urspr?ngliche Nachricht-----
Von: hostap-bounces+db=arceo.de at shmoo.com
[mailto:hostap-bounces+db=arceo.de at shmoo.com]Im Auftrag von ARCEO Daniel
Beuchler
Gesendet: Mittwoch, 15. September 2004 22:01
An: hostap at shmoo.com
Cc: gg at arceo.de
Betreff: Problems with ALLNET PCI Card


Hi there,

im currently trying to setup
a debian (sarge) box as wlan access point with
hostap driver - im using a allnet PCI card
(Prism 2.5 chipset) - all worked out fine
(out of the box - couldnt believe it ;-)

but *sending* data to/over the access point
is (really) slow/or fails at all ... "download"
means sending data to nodes booked in the
access point - no problem - at accurate speeds ...
I mentioned that after using the WLAN for several
days when i tried to send emails with attachments

testing with orinoco driver in ad-hoc mode
im facing the same - (even worse)

i tried fiddling MTU, iwconfig rts, iwconfig frag
but this might be a general problem with my allnet pci
card ... hardware broken ? cant believe it - FAQ
mentions that untested hardware might bring
unexpected results -

any suggestions?
(debugging possibilities?)

thanks in advance
Daniel
_______________________________________________
HostAP mailing list
HostAP at shmoo.com
http://lists.shmoo.com/mailman/listinfo/hostap