firmware not loading

[James B. Hiller]

Hi!

> On Friday 22 October 2004 02:49 pm, Josh Wyatt wrote:
> > I am not sure how to know the revision of the card.  I do not have physical
> > access to the machine, so I cannot see the card.  I am assuming "E" (I
> > believe I may have seen E1 on the packaging moons ago).
> 
> I think they're only selling "E" now, so unless this thing is used...

FWIW, I'm thinking that maybe he does have one of the A/B.  See below.
> 
> > I can give you lspci -vv output:
> > 01:08.0 Network controller: Harris Semiconductor Prism 2.5 Wavelan chipset
> > (rev 01)
> >          Subsystem: Harris Semiconductor Prism 2.5 Wavelan chipset
> >          Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop-
> > ParErr- Step ping- SERR+ FastB2B-
> >          Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> > <TAbort - <MAbort- >SERR- <PERR-
> >          Interrupt: pin A routed to IRQ 3
> >          Region 0: Memory at f8000000 (32-bit, prefetchable) [size=4K]
> >          Capabilities: [dc] Power Management version 2
> >                  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> > PME(D0+,D1+,D2+,D3hot +,D3cold-)
> >                  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> >
> 
> The subsystem line doesn't match my card (I know it's a rev.E). My subsystem 
> line says "D-Link System Inc DWL-520 Wireless PCI Adapter, Rev E1". Numeric 
> subsystem IDs are 1186:3700. Run 'lspci -vvv -n -s 01:08.0" to match up the 
> numeric IDs.

My lspci -vv from a Rev A2 is:

00:0b.0 Network controller: Harris Semiconductor Prism 2.5 Wavelan chipset (rev 01)
        Subsystem: D-Link System Inc DWL-520 Wireless PCI Adapter
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64, cache line size 08
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at e1030000 (32-bit, prefetchable) [size=4K]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

And lspci -vvv -n -s is:

00:0b.0 Class 0280: 1260:3873 (rev 01)
        Subsystem: 1186:3501
..

Hope this helps confirm/deny.

jbh