installing HostAP with dwl650+

[Suresh Govindaraj]

Hi,

PCMCIA_PATH is to specify the path for the PCMCIA support package, if the
kernel specified in KERNEL_PATH doesn't support PCMCIA. This is not related
to the WLAN HostAP support for different cards.
Current now the HostAP driver supports only prism2/2.5/3 chipset based cards.
So, if the card is based on the prism chipset, then the HostAP driver will
work.

-----Original Message-----
From: capacity77 at tin.it [mailto:capacity77 at tin.it]
Sent: Thursday, October 14, 2004 9:41 PM
To: hostap at shmoo.com
Subject: installing HostAP with dwl650+


Hi!
I'm trying to install HostAP but I'm using a DWL650+ wireless card which
uses the external module acx100. So as said in the README I should edit
the Makefile and insert the PCMCIA_PATH. but what should exactly be this
PCMCIA_PATH?
thank you
capacity

_______________________________________________
HostAP mailing list
HostAP at shmoo.com
http://lists.shmoo.com/mailman/listinfo/hostap
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: disclaimer.txt
Url: http://lists.shmoo.com/pipermail/hostap/attachments/20041015/5c7bc8d0/attachment.txt