terminated at sending EAPOL-key 2/4 on PEAP.

[YenJung Chang]

Hi, Jouni,

Thanks for your reply.
I tried it with PEAPv0, and it is workable now, Thanks again. :)

Regards,
yj.


On Wed, 3 Nov 2004 21:54:14 -0800, Jouni Malinen <jkmaline at cc.hut.fi> wrote:
> On Thu, Nov 04, 2004 at 01:48:05PM +0800, YenJung Chang wrote:
> 
> > I can't connect to my RADIUS server with EAP-PEAP, my setting,
> > environment and debug message are showed below..
> > However, the WPA-PSK is workable...
> 
> > # EAP-PEAP/MSCHAPv2 configuration for RADIUS servers that use the new peaplabel
> > # (e.g., Radiator)
> > network={
> 
> >       phase1="peaplabel=1"
> 
> Why did you select this example? The RADIUS server is using PEAPv0 and
> the wpa_supplicant configuration here is set to use v1 PEAP label in
> session key generation. This will not interoperate. Please re-test after
> removing that phase1 configuration.
> 
> --
> Jouni Malinen                                            PGP id EFC895FA
> _______________________________________________
> HostAP mailing list
> HostAP at shmoo.com
> http://lists.shmoo.com/mailman/listinfo/hostap
>