terminated at sending EAPOL-key 2/4 on PEAP.

[Jouni Malinen]

On Thu, Nov 04, 2004 at 01:48:05PM +0800, YenJung Chang wrote:

> I can't connect to my RADIUS server with EAP-PEAP, my setting,
> environment and debug message are showed below..
> However, the WPA-PSK is workable...

> # EAP-PEAP/MSCHAPv2 configuration for RADIUS servers that use the new peaplabel
> # (e.g., Radiator)
> network={

> 	phase1="peaplabel=1"

Why did you select this example? The RADIUS server is using PEAPv0 and
the wpa_supplicant configuration here is set to use v1 PEAP label in
session key generation. This will not interoperate. Please re-test after
removing that phase1 configuration.

-- 
Jouni Malinen                                            PGP id EFC895FA