WPA-PSK reconnection problem
Sat Jun 5 11:05:30 PDT 2004
On Jun 5, 2004, at 13:13, Michael Guntsche wrote:
> Hello Jouni,
> I just tried reconnecting again with the latest CVS-version and I
> still have the same problem.
> The first part of the handshake takes place, but then nothing else.
> Regarding your question if I see anything in the dmesg output if
> hostapd shows
> "Failed to set encryption.", there is nothing.
> If you need more information or want me to do some tests, don't
> hestitate to tell me.
I did some more tests this afternoon and I noticed another strange
After sending the notebook to sleep while connected,
I see the following in the log
disassocation: STA=00:0d:93:83:92:7a reason_code=8
wlan0: STA 00:0d:93:83:92:7a WPA: event 2 notification
WPA: 00:0d:93:83:92:7a WPA_PTK entering state DISCONNECTED
WPA: 00:0d:93:83:92:7a WPA_PTK entering state INITIALIZE
wlan0: STA 00:0d:93:83:92:7a IEEE 802.1X: unauthorizing port
wlan0: STA 00:0d:93:83:92:7a IEEE 802.11: disassociated
Wireless event: cmd=0x8c04 len=20
This looks mostly ok to me, but why is it entering state INITIALIZE?
Now, the reykeying on the AP takes place.
wlan0: WPA rekeying GTK
WPA: group state machine entering state SETKEYS
GMK - hexdump(len=32): 05 b4 09 e6 9d 02 00 35 33 2b 61 59 61 d4 19 74
2e f7 04 57 5b 17 79 9b e6 06 e8 86 0a 29 f8 6e
GTK - hexdump(len=32): 06 c7 09 31 86 51 48 0a be 4c 91 24 a1 d3 98 1b
15 d6 96 30 eb bd f7 7a 8d a5 10 ae 00 92 7b ef
So far so good, but now I see this in the logs
WPA: 00:0d:93:83:92:7a WPA_PTK_GROUP entering state REKEYNEGOTIATING
wlan0: STA 00:0d:93:83:92:7a WPA: sending 1/2 msg of Group Key Handshake
Plaintext EAPOL-Key Key Data - hexdump(len=32): 06 c7 09 31 86 51 48 0a
be 4c 91 24 a1 d3 98 1b 15 d6 96 30 eb bd f7 7a 8d a5 10 ae 00 92 7b ef
wlan0: STA 00:0d:93:83:92:7a WPA: PTK not valid when sending EAPOL-Key
WPA: group state machine entering state SETKEYSDONE
Why is the AP trying to perform a REKEYNEGOTIATION with the notebook,
although it was logged off a few seconds ago?
The next time I turn on the wireless card in the notebook it stops the
assocation process here.
wlan0: STA 00:0d:93:83:92:7a WPA: sending 3/4 msg of 4-Way Handshake
Received 155 bytes management frame
DATA (TX callback) ACK
IEEE 802.1X: 00:0d:93:83:92:7a TX status - version=1 type=3 length=119
Received 131 bytes management frame
IEEE 802.1X: 99 bytes from 00:0d:93:83:92:7a
IEEE 802.1X: version=1 type=3 length=95
wlan0: STA 00:0d:93:83:92:7a WPA: received EAPOL-Key frame (4/4
WPA: 00:0d:93:83:92:7a WPA_PTK entering state PTKINITDONE
wlan0: STA 00:0d:93:83:92:7a IEEE 802.1X: authorizing port
wlan0: STA 00:0d:93:83:92:7a WPA: pairwise key handshake completed
For me it looks like that the AP is thinking that the client is still
there, although he already logged off.
I am not sure, if this the reason for the problems I have though.
I hope this info helps tracking down the problem.
More information about the Hostap