Firmware upgrade fails - ioctl[PRISM2_IOCTL_DOWNLOAD]: No such device

Stefan Lesicnik lists
Tue Jan 27 00:08:00 PST 2004


Im trying to upgrade my firmware, this is what i get

The test without the -f says Ok.

Does anyone have any ideas? 




odie utils # ./prism2_srec -v -f wlan0 /home/glock/sf010704.hex 
S3 CRC-16 generation record: start=0x007E1800 len=65414 prog=1
Start address 0x00000000
srec summary for sf010704.hex
Component: 0x001f 1.7.4 (station firmware)
Supported platforms:
  0x800a 1.0.0,  0x800b 1.0.0,  0x800c 1.0.0,  0x800d 1.0.0,  0x8012
1.0.0  0x8013 1.0.0,  0x8014 1.0.0,  0x8016 1.0.0,  0x8017 1.0.0, 
0x8018 1.0.0  0x801a 1.0.0,  0x801b 1.0.0,  0x801c 1.0.0,  0x8021 1.0.0,
 0x8022 1.0.0  0x8023 1.0.0
Interface compatibility information:
  role=Supplier variant=4 range=1-12 iface=Station Firmware-Driver (4)
  role=Actor    variant=1 range=1-1 iface=Modem-Firmware (1)
  role=Actor    variant=2 range=1-1 iface=Controller-Firmware (2)
  role=Actor    variant=1 range=4-4 iface=Primary Firmware-Driver (3)
Separate S3 data areas:
S3 area count: 3
  addr=0x007E1800..0x007EE2DB (len=51932)
  addr=0x007F0800..0x007F1785 (len=3974)
  addr=0x007FE000..0x007FECC5 (len=3270)
Total data length: 59176
Start address 0x00000000

Wireless LAN card information:
  NICID: 0x800c v1.0.0
  PRIID: 0x0015 v1.1.0
  STAID: 0x001f v1.4.9
Interface compatibility information:
  PRI role=Supplier variant=1 range=1-1 iface=Modem-Firmware (1)
  PRI role=Supplier variant=2 range=1-1 iface=Controller-Firmware (2)
  PRI role=Supplier variant=1 range=4-4 iface=Primary Firmware-Driver
(3)  STA role=Supplier variant=1 range=1-9 iface=Station Firmware-Driver
(4)  PRI role=Actor    variant=2 range=1-1 iface=Controller-Firmware (2)
  STA role=Actor    variant=2 range=1-1 iface=Controller-Firmware (2)
  STA role=Actor    variant=1 range=1-1 iface=Modem-Firmware (1)

Verifying update compatibility and combining data:
Plugging PDR 0xffffffff at 0x007ede00 (len=14)
Plugging PDR 0x0202 at 0x007f11ee (len=100)
Plugging PDR 0x0203 at 0x007f1252 (len=128)
Plugging PDR 0x0204 at 0x007f13d2 (len=80)
Plugging PDR 0x0405 at 0x007f1422 (len=4)
PDR 0x0405 not found from wlan card PDA. Using default data.
  len=4: 00 00 00 30
Plugging PDR 0x0300 at 0x007f1426 (len=28)
Plugging PDR 0x0301 at 0x007f1442 (len=34)
Plugging PDR 0x0101 at 0x007f163a (len=6)
Plugging PDR 0x0103 at 0x007eddc2 (len=12)
Plugging PDR 0x0104 at 0x007edef8 (len=2)
Plugging PDR 0x0105 at 0x007f1646 (len=2)
Plugging PDR 0x0105 at 0x007edf2e (len=2)
Plugging PDR 0x0105 at 0x007f1742 (len=2)
Plugging PDR 0x0107 at 0x007eddd0 (len=2)
Plugging PDR 0x0006 at 0x007edd9c (len=10)
Plugging PDR 0x0406 at 0x007f16da (len=2)
PDR 0x0406 not found from wlan card PDA. Using default data.
  len=2: 64 00
Plugging PDR 0x0302 at 0x007f146a (len=2)
PDR 0x0302 not found from wlan card PDA. Using default data.
  len=2: 12 00
Plugging PDR 0x0303 at 0x007f146c (len=2)
PDR 0x0303 not found from wlan card PDA. Using default data.
  len=2: ff 1f
Plugging PDR 0x0412 at 0x007edf50 (len=6)
PDR 0x0412 not found from wlan card PDA. Using default data.
  len=6: ff ff 02 00 02 00
Generating CRC-16 (start=0x007e1800, len=65414) at 0x007e17fe

Downloading to non-volatile memory (flash).
Note! This can take about 30 seconds. Do _not_ remove card during
download. ioctl[PRISM2_IOCTL_DOWNLOAD]: No such device

Download failed!

More information about the Hostap mailing list