WPA_PTK entering state AUTHENTICATION2

[Project 2k4]

Hi, Thanks for taking a look...

Jouni Malinen wrote:

> Please send your hostapd configuration file. This could be a
> configuration problem. Are you trying to use WPA-PSK or WPA-EAP/RADIUS?

I'm trying to use WPA-EAP/RADIUS. WPA-PSK works just fine w/ the Cisco 
Aironet 350 card (and it's the only card I am keen on getting to work 
first).

Here's my hostapd.conf:

-----
interface=wlan0
logger_syslog=-1
logger_syslog_level=2
logger_stdout=-1
logger_stdout_level=2
debug=0
dump_file=/tmp/hostapd.dump
ssid=test
macaddr_acl=0
auth_algs=3
minimal_eap=0
eap_message=hello
wep_rekey_period=300
eapol_key_index_workaround=0
iapp_interface=eth0
own_ip_addr=192.168.5.1
auth_server_addr=192.168.3.157
auth_server_port=1812
auth_server_shared_secret=test
radius_retry_primary_interval=600
wpa=1
wpa_passphrase=openthisap
wpa_key_mgmt=WPA-EAP
wpa_pairwise=TKIP
wpa_group_rekey=600
wpa_gmk_rekey=86400
-----

Cheers
Jonnas




-- 
http://www.confero24.com
The Best Source of Network Hardware for Open Source Projects