WPA_PTK entering state AUTHENTICATION2

[Jouni Malinen]

On Fri, Dec 10, 2004 at 03:05:23PM +0100, Project 2k4 wrote:

>    mgmt::reassoc_req
>    reassociation request: STA=00:07:50:cb:1b:fa capab_info=0x11 
> listen_interval=200
>    current_ap=00:02:6f:34:97:d4
>    new AID 1
>    wlan0: STA 00:07:50:cb:1b:fa IEEE 802.11: association OK (aid 1)
>    MGMT (TX callback) ACK
>    mgmt::reassoc_resp cb
>    wlan0: STA 00:07:50:cb:1b:fa IEEE 802.11: associated (aid 1)
>    wlan0: STA 00:07:50:cb:1b:fa WPA: event 1 notification
>    wlan0: STA 00:07:50:cb:1b:fa WPA: start authentication
>    WPA: 00:07:50:cb:1b:fa WPA_PTK entering state INITIALIZE
>    WPA: 00:07:50:cb:1b:fa WPA_PTK_GROUP entering state IDLE
>    WPA: 00:07:50:cb:1b:fa WPA_PTK entering state AUTHENTICATION
>    WPA: 00:07:50:cb:1b:fa WPA_PTK entering state AUTHENTICATION2
>    -----
> 
> Has anyone seen the auth fail at "WPA_PTK entering state 
> AUTHENTICATION2"? Is this a symptom of something I should check? Any 
> hints would help.

Please send your hostapd configuration file. This could be a
configuration problem. Are you trying to use WPA-PSK or WPA-EAP/RADIUS?

-- 
Jouni Malinen                                            PGP id EFC895FA