Messages.

[Eduardo Kaftanski]

Refresh: I was running 0.0.1 and 0.0.2 with kernel 2.4.18-27.7.x without
a single problem. Upgraded my machine to a SMP box (2 Pentium II 266) and
got a lot of hangs, bith card and box.

Today: I upgraded to 0.0.3 on kernel 2.4.20-13.7smp and so far no hangs,
but this messages:

wlan0: driver bug - prism2_transmit() called when previous TX was pending
wlan0: prism2_tx - to BAP0 failed
wlan0: scheduled card reset
hostap_pci: wlan0: resetting card
wlan0: removed pending cmd_queue entry (type=1, cmd=0x010b, param0=0x0129)
prism2_hw_init()
prism2_hw_init: initialized in 18293 iterations
wlan0: trying to read PDA from 0x007f0000: OK
wlan0: STA 00:06:25:25:2b:59 TX rate lowered to 55
wlan0: STA 00:06:25:25:2b:59 TX rate lowered to 20
wlan0: STA 00:06:25:25:2b:59 TX rate lowered to 10
device br0 entered promiscuous mode
device br0 left promiscuous mode
wlan0wds0: driver bug - prism2_transmit() called when previous TX was pending
wlan0wds0: prism2_tx - to BAP0 failed
wlan0: scheduled card reset
hostap_pci: wlan0: resetting card
prism2_hw_init()
prism2_hw_init: initialized in 18251 iterations
wlan0: trying to read PDA from 0x007f0000: OK
wlan0: driver bug - prism2_transmit() called when previous TX was pending
wlan0: prism2_tx - to BAP0 failed
wlan0: scheduled card reset
hostap_pci: wlan0: resetting card
wlan0: removed pending cmd_queue entry (type=1, cmd=0x010b, param0=0x01ba)
prism2_hw_init()
prism2_hw_init: initialized in 18272 iterations
wlan0: trying to read PDA from 0x007f0000: OK

If it helps debugging, I will be pleased.
Card is a Dlink DWL520 flashed to 1.4.9 running ram downloaded 1.5.6.


-- 
Eduardo Kaftanski
eduardo at linuxcenter.cl
Gerente Ingenieria LinuxCenter S.A.
Canada 239 5to Piso, Providencia, Stgo de Chile.
http://www.linuxcenter.cl 2745000