Netgear PCI MA311 Problems

Ernst Lehmann lehmann
Tue May 6 08:22:52 PDT 2003


On Tue, 2003-05-06 at 04:38, Brian Sugar wrote:
> Hi. I just installed Netgear PCI MA311 and works perfectly as a client 
> to my AirPort (albeit no wep yet but use mac addresses for now).  Now I 
> am trying to setup as an Access Point.  Following problems happen after 
> I compile hostap:
> 
> # /sbin/modprobe hostap_pci
> /lib/modules/2.4.20-8/net/hostap_pci.o: init_module: No such device
> Hint: insmod errors can be caused by incorrect module parameters, 
> including invalid IO or IRQ parameters.
>        You may find more information in syslog or the output from dmesg
> /lib/modules/2.4.20-8/net/hostap_pci.o: insmod 
> /lib/modules/2.4.20-8/net/hostap_pci.o failed
> /lib/modules/2.4.20-8/net/hostap_pci.o: insmod hostap_pci failed

If you can do a ifconfig wlan0 successfully,
this means, there is already a driver loaded ??

for me it looks like, you are using the wlan-ng driver for your
client-access.

You have to unload it first.

do a ifconfig wlan0 down
rmmod prism2_pci
rmmod p80211

then you can modprobe hostap_pci, and it should work..

If not... hmm no other ideas.... I have a MA311 and it works fine....
with hostap_pci




> 
> # dmesg
> hostap_pci: 0.0.2 - 2003-05-03 (Jouni Malinen <jkmaline at cc.hut.fi>)
> hostap_pci: No devices found, driver not installed.
> hostap_crypt: unregistered algorithm 'NULL' (deinit)
> 
> 
> # /sbin/lspci | grep Prism
> 00:0e.0 Network controller: Harris Semiconductor Prism 2.5 Wavelan 
> chipset (rev 01)
> 
> 
> # /sbin/ifconfig wlan0
> wlan0     Link encap:Ethernet  HWaddr 00:09:5B:41:38:6E
>            inet addr:192.168.1.192  Bcast:192.168.1.255  
> Mask:255.255.255.0
>            UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>            RX packets:2013 errors:0 dropped:0 overruns:0 frame:0
>            TX packets:852 errors:0 dropped:0 overruns:0 carrier:0
>            collisions:0 txqueuelen:100
>            RX bytes:167149 (163.2 Kb)  TX bytes:104707 (102.2 Kb)
>            Interrupt:10 Memory:ce902000-ce903000
> 
> 
> Please help.
> 
> 
> --
> Brian
> 
> _______________________________________________
> HostAP mailing list
> HostAP at shmoo.com
> http://lists.shmoo.com/mailman/listinfo/hostap
-- 

Bye

	Ernst
---------
Ernst Lehmann             Email: lehmann at acheron.franken.de






More information about the Hostap mailing list