Intel PRO/Wireless 2011B PCMCIA: hfa384x_cmd - timeout

[Christoph Riedl]

Hello everyone.

I have a Intel PRO/Wireless 2011B PCMCIA card in my laptop running 
Debian 3.0 with 2.4.20.
As far as I know, this card uses the Prism 2.5 chip, and there for
should work with thie hostap driver. However, I can't get it working.
The driver compiled fine but does not load correctely. Im using
hostap-2002-10-12.
Here is an excerpt from my kern.log:


Mar 10 09:30:48 crmobile kernel: cs: IO port probe 0x0c00-0x0cff: clean.
Mar 10 09:30:48 crmobile kernel: cs: IO port probe 0x0820-0x08ff: clean.
Mar 10 09:30:48 crmobile kernel: cs: IO port probe 0x0800-0x080f: clean.
Mar 10 09:30:48 crmobile kernel: cs: IO port probe 0x0100-0x04ff: 
excluding 0x378-0x37f 0x398-0x39f 0x4d0-0x4d7
Mar 10 09:30:48 crmobile kernel: cs: IO port probe 0x0a00-0x0aff: clean.
Mar 10 09:30:48 crmobile kernel: cs: memory probe 0xa0000000-0xa0ffffff: 
clean.
Mar 10 09:30:49 crmobile kernel: hostap_crypt: registered algorithm 'NULL'
Mar 10 09:30:49 crmobile kernel: hostap_cs: hostap_cs.c 0.0.0 2002-10-12 
(SSH Communications Security Corp, Jouni Malinen)
Mar 10 09:30:49 crmobile kernel: hostap_cs: (c) Jouni Malinen 
<jkmaline at cc.hut.fi>
Mar 10 09:30:49 crmobile kernel: hostap_cs: setting Vcc=33 (constant)
Mar 10 09:30:49 crmobile kernel: hostap_cs: CS_EVENT_CARD_INSERTION
Mar 10 09:30:49 crmobile kernel: prism2_config()
Mar 10 09:30:49 crmobile kernel: hostap_cs: setting Vcc=33 (from config)
Mar 10 09:30:49 crmobile kernel: Checking CFTABLE_ENTRY 0x01 (default 0x01)
Mar 10 09:30:49 crmobile kernel: IO window settings: cfg->io.nwin=1 
dflt.io.nwin=1
Mar 10 09:30:49 crmobile kernel: io->flags = 0x00C7, io.base=0x0000, len=72
Mar 10 09:30:49 crmobile kernel: hostap_cs: index 0x01: Vcc 3.3, irq 5, 
io 0x0100-0x0147
Mar 10 09:30:49 crmobile kernel: hostap_cs: Registered netdevice wlan0
Mar 10 09:30:49 crmobile kernel: prism2_hw_init()
Mar 10 09:30:49 crmobile kernel: wlan0: hfa384x_cmd - timeout - reg=0xec35
Mar 10 09:30:49 crmobile kernel: hostap_cs: first command failed - is 
the card compatible?
Mar 10 09:30:49 crmobile kernel: hostap_cs: Initialization failed
Mar 10 09:30:49 crmobile kernel: wlan0: prism2_open
Mar 10 09:30:49 crmobile kernel: wlan0: hfa384x_cmd_issue: cmd reg was 
busy for 1000 usec
Mar 10 09:30:49 crmobile kernel: wlan0: hfa384x_cmd_issue - timeout - 
reg=0xec35
Mar 10 09:30:49 crmobile kernel: wlan0: hfa384x_cmd: entry still in 
list? (entry=c1440a60, type=0, res=-1)
Mar 10 09:30:49 crmobile kernel: wlan0: hfa384x_cmd: interrupted; err=-110
Mar 10 09:30:49 crmobile kernel: wlan0: MAC port 0 enabling failed
Mar 10 09:30:49 crmobile kernel: wlan0: could not enable MAC port
Mar 10 09:30:49 crmobile kernel: wlan0: prism2_close