http://www.macsense.com/support/aeropad/firmwareupgrade_b.html

[Craig Foster]

I've used these on a USB Seimens Speedstream, but I have my doubts that they 
will work for a PCMCIA card.  if the hostap modules are loaded, you can check 
your card type with hostap_diag.  On the first line you should see something 
like:

NICID: id=0x8013
            ^^^^

The Aeropad firwares are designed for the following cards:

PRI: 8010, 801F, 8026
STA: 800A, 800F, 8010, 8011, 801E, 801F, 8020, 8026, 8027

You might also try the Netgate firmwares, if the Aeropad one doesn't match:

http://www.netgate.com/support/prism_firmware/

They support the following types:

PRI: 800C, 8013, 8017, 801B, 8022
STA: 800A, 800B, 800C, 800D, 8012, 8013, 8014, 8016, 8017, 8018, 801A, 801B, 
801C, 8023

-- 
Craig Foster
craig at wiw.org

Emir Erkocevic <emir at djesi.ba> said:

> 
> Hi All
> 
> is anyone using this firmware ?
> 
> http://www.macsense.com/support/aeropad/firmwareupgrade_b.html
> 
> using wl11000 on PCI adapter
> 
> 
> 
> Best regards
> 
> 
> 
> 
> 
> _______________________________________________
> HostAP mailing list
> HostAP at shmoo.com
> http://lists.shmoo.com/mailman/listinfo/hostap
>