Problems with hostap-0.0.3 an 2.4.21-rc6 /wolk 4.0s

[Ruben Puettmann]

On Tue, Jun 03, 2003 at 10:36:18AM +0200, Ruben Puettmann wrote:

            hy,
  
>  The client is an prism2 card (Dlink 650) with wlan_ng driver. The client
>  has run with the old modules an 2.4.19 without problems. Now I get an
>  error like these : 
>  
>  ping 192.168.1.10
>  PING 192.168.1.10 (192.168.1.10): 56 data bytes
>  64 bytes from 192.168.1.10: icmp_seq=0 ttl=64 time=2216.5 ms
>  64 bytes from 192.168.1.10: icmp_seq=0 ttl=64 time=2217.6 ms (DUP!)
>  64 bytes from 192.168.1.10: icmp_seq=0 ttl=64 time=2218.8 ms (DUP!)
>  64 bytes from 192.168.1.10: icmp_seq=0 ttl=64 time=2225.3 ms (DUP!)
>  64 bytes from 192.168.1.10: icmp_seq=0 ttl=64 time=2227.4 ms (DUP!)
>  64 bytes from 192.168.1.10: icmp_seq=0 ttl=64 time=2228.4 ms (DUP!)
>  64 bytes from 192.168.1.10: icmp_seq=0 ttl=64 time=2229.5 ms (DUP!)
>  64 bytes from 192.168.1.10: icmp_seq=0 ttl=64 time=2230.7 ms (DUP!)
>  
>  --- 192.168.1.10 ping statistics ---
>  4 packets transmitted, 1 packets received, +7 duplicates, 75% packet
>  loss
>  round-trip min/avg/max = 2216.5/2224.2/2230.7 ms
>  
>  without any error in syslog oder dmesg  

I have found the error. 

You will need the latest wireless ext. from

http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html

With linux 2.4.22-pre1 + hostap 0.3.0 + Wireless Extensions v16 all runs
fine now.


        Ruben


-- 
Ruben Puettmann
ruben at puettmann.net
http://www.puettmann.net