Senao SL-2511CD Ext2 (Yang-Hwee TAN)

Yang-Hwee TAN tanyh
Sun Jun 22 19:13:29 PDT 2003


Hi,

i'm not sure what causes this no irq errors either.
recently, about a month ago, i bought a Richoh pcmcia 
adapter as well, and have the same error. at first i 
thought it was bios. i change the installation on 
another system with different bios, it didn't work too.
both m/boards did have pci bus v2.2 or higher.

happen that the richoh card is valid for a refund, 
hence i went to get a refund for incompatible reason. 
i realised this Richoh cards seesm to have been revised 
and unable to be used for Wireless cards on Linux.
And it works well on Windows. I find it really strange, 
but i didn't have time to debug and figure more out of 
it at that time.

May be others have similar experience with any recently 
bought Richoh adaptor cards, please share if you encountered 
and fixed it.


thanks,
yanghwee.

- - -
On Fri, 20 Jun 2003 17:16:14 +0200
amalvido <amalvido at gts.tsc.uvigo.es> wrote:

> Thanks dear Yang-Hwee.
> 
> Your help it's very useful to me. I go forward, but I jey have some 
> problems. Now I have next error message  whit dmesg:
> 
> hostap_crypt: registered algorithm 'NULL'
> hostap_cs: hostap_cs.c 0.0.0 2002-10-12 (SSH Communications Security 
> Corp, Jouni Malinen)
> hostap_cs: (c) Jouni Malinen <jkmaline at cc.hut.fi>
> hostap_cs: setting Vcc=33 (constant)
> hostap_cs: CS_EVENT_CARD_INSERTION
> prism2_config()
> hostap_cs: setting Vcc=33 (from config)
> Checking CFTABLE_ENTRY 0x01 (default 0x01)
> IO window settings: cfg->io.nwin=1 dflt.io.nwin=1
> io->flags = 0x0046, io.base=0x0000, len=64
> hostap_cs: RequestIRQ: Resource in use
> prism2_release
> : card already removed or not configured during shutdown
> release - done
> prism2_detach
> hostap_free_data: ap has not yet been initialized - skip resource freeing
> 
> The Ricoh PCMCIA-PCI adapter isn't on control panel irq list, but it 
> appears in lspci.
> In pcmcia file in /etc/sysconfig/ directory I wrote:
> PCMCIA=yes
> PCIC=i82365
> PCIC_OPTS="irq_mode=1"
>  It's this fine.
> 
> Thanks to All for your responses.
> 
> 
> 
> _______________________________________________
> HostAP mailing list
> HostAP at shmoo.com
> http://lists.shmoo.com/mailman/listinfo/hostap




More information about the Hostap mailing list