Shutdown wlan interface

[Sachin Ganu]

If you dont want to use the card, you could use "cardctl eject 0" to
"eject" it (without actually pulling it out)

to restart the card, you use "cardctl insert 0"

Hope that helps,
Sachin

-----------------------------------------------------------
Sachin Ganu
Graduate Research Assistant
WINLAB, Rutgers University
73 Brett Rd, Piscataway NJ 08854

On Tue, 19 Aug 2003, Shripad N wrote:

> hi,
> 
> Is there any way to shutdown the wlan interface, ie stop consuming power, by
> issuing a command.
> 
> iwconfig does not have a "down" option.
> 
> I dont want to plug in and plug out the card for that purpose. I tried
> ifconfig wlan0 down
> 
> But the activity indicator of the card still is blinking.
> 
> please help,
> regards
> Shripad
> 
> 
> DISCLAIMER:
> This message (including attachment if any) is confidential and may be privileged. Before opening attachments please check them for viruses and defects. MindTree Consulting Private Limited (MindTree) will not be responsible for any viruses or defects or any forwarded attachments emanating either from within MindTree or outside. If you have received this message by mistake please notify the sender by return  e-mail and delete this message from your system. Any unauthorized use or dissemination of this message in whole or in part is strictly prohibited.  Please note that e-mails are susceptible to change and MindTree shall not be liable for any improper, untimely or incomplete transmission.
> _______________________________________________
> HostAP mailing list
> HostAP at shmoo.com
> http://lists.shmoo.com/mailman/listinfo/hostap
> 
>