hostap on Senao 2511 wireless cards

[Evan Harris]

I'm trying to get hostap running on some Senao 2511 cards, and am getting
some error messages when starting the card.  The Senao cards are supposed to
be Prism reference design cards, and have been working fine for us for a
long time with wlan-ng as the client side.

Any help or suggestions anyone can give would be greatly appreciated.

Linux PCMCIA Card Services 3.2.2
  kernel build: 2.4.20 unknown
  options:  [pci] [cardbus]
Intel ISA/PCI/CardBus PCIC probe:
PCI: Found IRQ 5 for device 00:10.0
  Ricoh RL5C475 rev 80 PCI-to-CardBus at slot 00:10, mem 0xf75ff000
    host opts [0]: [isa irq] [io 3/6/1] [mem 3/6/1] [pci irq 5] [lat
168/176] [bus 2/5]
    ISA irqs (default) = 3,4,7,12 PCI status changes
cs: memory probe 0xa0000000-0xa0ffffff: clean.
hostap_crypt: registered algorithm 'NULL'
hostap_cs: 0.0.4 - 2003-07-27 (Jouni Malinen <jkmaline at cc.hut.fi>)
hostap_cs: setting Vcc=33 (constant)
hostap_cs: CS_EVENT_CARD_INSERTION
prism2_config()
hostap_cs: setting Vcc=33 (from config)
Checking CFTABLE_ENTRY 0x01 (default 0x01)
IO window settings: cfg->io.nwin=1 dflt.io.nwin=1
io->flags = 0x0046, io.base=0x0000, len=64
cs: IO port probe 0x0100-0x04ff: excluding 0x220-0x22f 0x388-0x38f
0x3c0-0x3df 0x4d0-0x4d7
cs: IO port probe 0x0230-0x0387: clean.
cs: IO port probe 0x0390-0x03bf: clean.
cs: IO port probe 0x03e0-0x04cf: clean.
cs: IO port probe 0x04d8-0x04ff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0a00-0x0aff: clean.
cs: IO port probe 0x0c00-0x0cff: clean.
hostap_cs: index 0x01: Vcc 3.3, irq 3, io 0x0100-0x013f
hostap_cs: Registered netdevice wlan0
prism2_hw_init()
prism2_hw_init: initialized in 190 ms
wlan0: hfa384x_cmd: entry still in list? (entry=c7ffdc60, type=0, res=0)
wlan0: hfa384x_cmd: command was not completed (res=0, entry=c7ffdc60,
type=0, cmd=0x0021, param0=0xfd0b, EVSTAT=8010 INTEN=0010)
wlan0: interrupt delivery does not seem to work
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd0b, len=8)
Could not get RID for component NIC
wlan0: hfa384x_cmd: entry still in list? (entry=c7ffdc60, type=0, res=0)
wlan0: hfa384x_cmd: command was not completed (res=0, entry=c7ffdc60,
type=0, cmd=0x0021, param0=0xfd02, EVSTAT=8010 INTEN=0010)
wlan0: interrupt delivery does not seem to work
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd02, len=8)
Could not get RID for component PRI
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0x8021
wlan0: hfa384x_cmd: entry still in list? (entry=c7ffdc60, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd20, len=8)
Could not get RID for component STA
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0x8021
wlan0: hfa384x_cmd: entry still in list? (entry=c7ffdc60, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd20, len=8)
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0x8021
wlan0: hfa384x_cmd: entry still in list? (entry=c7ffdc60, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fc01, len=6)
wlan0: could not get own MAC address
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0x8000
wlan0: hfa384x_cmd: entry still in list? (entry=c7ffdc60, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_set_rid: CMDCODE_ACCESS_WRITE failed (res=-110, rid=fce0,
len=2)
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0x8000
wlan0: hfa384x_cmd: entry still in list? (entry=c7ffdc60, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_set_rid: CMDCODE_ACCESS_WRITE failed (res=-110, rid=fc00,
len=2)
wlan0: Port type setting to 6 failed
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0x8000
wlan0: hfa384x_cmd: entry still in list? (entry=c7ffdc60, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: MAC port 0 enabling failed

Hostapd output is:

Configuration file: /etc/hostapd/hostapd.conf
Using interface wlan0ap with hwaddr 00:00:00:00:00:00 and ssid
'TxDOT_CST_ESG'
ioctl[SIOCSIWESSID]: Invalid argument
len=13
Could not set SSID for kernel driver

And here are the kernel messages from hostapd:

wlan0: enabling hostapd mode
wlan0: Registered netdevice wlan0ap for AP management
wlan0: Registered netdevice wlan0sta for STA use
wlan0ap: prism2_open
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0x8000
wlan0: hfa384x_cmd: entry still in list? (entry=c6dacbe0, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_set_rid: CMDCODE_ACCESS_WRITE failed (res=-110, rid=fc02,
len=34)
wlan0ap: prism2_close
wlan0: disabling hostapd mode
wlan0: Netdevice wlan0ap unregistered
wlan0: Netdevice wlan0sta unregistered

Thanks in advance.

Evan